NJIT
A detailed mechanism for initial phases of oxidation and pyrolysis of methyl tert-butyl ether (MTBE)
Abstract
dc:description.abstract<p>The lead phasedown in gasoline in both the U. S. and in Europe, the failure of other nonlead oxygenates (e.g. ethanol...) to significantly improve octance ratings and therefore to serve as replacement for tetra ethyl lead in gasline, and the U. S. Environmental Protection Agency's restrictions on gasoline RVP (Reid Vapor Pressure) to decrease tropospheric ozone concentrations are the factors causing the rapid growth in MTBE demand. There is however no detailed chemical kinetic study on the thermal or oxidative reactions of MTBE for full understanding the behavior and characteristics of MTBE and its degradation products during combustion processes.</p><p>Detailed mechanisms were developed for the oxidation reactions of MTBE (methyl tert-butyl ether) and compared with the experimental data done by Norton et.al.<sup><14></sup> in this work. The unimolecular and bimolecular including chemical activation processes versions of Quantum RRK theory were used to develop kinetic mechanisms for the MTBE oxidations. Sensitivity analysis on this reaction mechanism was performed to identify the important reaction channels and to improve the fit of the mechanism on experimental observation.</p><p>The model results give a satisfactory fit for the conversion of MTBE with the experimental data. This mechanism clearly indicates the acceptable path toward the formation of the major experimentally observed products, isobutylene and methanol. The molecular elimination path is dominant when temperature are below rs,900 K in the MTBE oxidation system. Our mechanism explains why Daly et a/.<sup><24></sup> and Choo et a4<sup><25></sup> concluded that the decomposition reaction of MTBE is a four-center molecular elimination at the condition of temperature around 700 K. We determine rate constants for important reactions at 1 atm and temperature between 800 and 1200 K :</p><p>(CH<sub>3</sub>)<sub>3</sub>COCH<sub>3</sub>--k<sub>1</sub>-->(CH<sub>3</sub>)<sub>2</sub>C = CH<sub>2</sub> + CH<sub>3</sub>OH</p><p>k<sub>1</sub> = 7.72 x 10<sup>13</sup>exp(-29700/T) sec<sup>-1</sup></p><p>(CH<sub>3</sub>)<sub>3</sub>COCH<sub>3</sub> --k<sub>2</sub>--> (CH<sub>3</sub>)<sub>3</sub>C • +CH<sub>3</sub>O*</p><p>k<sub>2</sub> = 3.66 x 10<sup>17</sup>exp(-39600/T) sec<sup>-1</sup></p><p>The difference between the calculation result and high pressure limit increases when the temperature is above 1000 K at atmospheric pressure. The reaction of (C<sub>3</sub>COC --> C<sub>3</sub>C • +CH<sub>3</sub>O-) therefore becomes important as the temperature increasing and becomes dominant when the temperature is higher than 1800 K.</p>
Degree
thesis:*- Name thesis:degree_name
- Master of Science in Environmental Science - (M.S.)
- Discipline thesis:degree_discipline
- Chemical Engineering, Chemistry and Environmental Science
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Ing, Wen-Chiun
- Contributors dc:contributor
-
- Joseph W. Bozzelli
- Richard B. Trattner
- Henry Shaw
Subjects
dc:subject × 4Identifiers
dc:identifier.*- Repository record dc:identifier
- https://digitalcommons.njit.edu/theses/2759