Abstract
dc:description.abstract<p>The object of this thesis was to predict the output of an extruder, for thermoplastic materials, by using simplified equations relating output to screw speed and screw geometry.</p><p>Three different extruders were used for this purpose and several addition-type polymers were studied. These materials included: stabilized and unstabilized polypropylene, low-density and high-density polyethylene, general-purpose polystyrene and rubber-modified poly-styrene.</p><p>The results obtained show that, by using relatively low screw speeds (up to 140 r.p.m.), shallow screw channels and back pressures at the die up to 2000 psig., a theoretical output can be calculated with a maximum deviation from the experimental data of 20%. The theoretical equation for output Q= 2’N is a function only of screw speed (N) and of screw geometry (2’), as shown in Table No. 6, page 55.</p><p>The basic assumptions made by the originators of these simplified formulae are many and quite restricting. Just to mention a few of these assumptions;</p><p>1) The flow is laminar and Newtonian in character.</p><p>2) The extruder is operating under isothermal conditions.</p><p>3) Leakage flow is neglected. In view of these simplifying assumptions, it is very interesting to note how closely the calculated outputs approximate the experimental ones.</p>
Degree
thesis:*- Name thesis:degree_name
- Master of Science in Chemical Engineering - (M.S.)
- Discipline thesis:degree_discipline
- Chemical Engineering
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Bergonzoni, Aldo
- Contributors dc:contributor
-
- Jerome J. Salamone
- Michael Frederick
- C. L. Mantell
Subjects
dc:subject × 3Identifiers
dc:identifier.*- Repository record dc:identifier
- https://digitalcommons.njit.edu/theses/2765