NJIT
Cryogenic characterization of potential high temperature superconducter substrates at microwave frequencies
Abstract
dc:description.abstract<p>The lack of characterization data for dielectric substrate materials at microwave frequencies and cryogenic temperatures hinders the development of high T<sub>c</sub> superconducting circuits. Low loss (tanδ < 10<sup>-4</sup>) substrates with dielectric constants in the range of 5-100 at cryogenic temperatures are needed to realize the advantages of superconductor circuits. Measurement techniques previously reported are either time consuming or inaccurate. We report an adaptation of Courtney's method for accurate, simple evaluation of complex dielectric constants (10 < ε<sub>r</sub> < 100) at low temperatures. The fixture was calibrated using known properties of polycrystalline ZrSnTiO4. We measured er and tans on three potential substrate materials, Al<sub>2</sub>O<sub>3</sub>, MgO, and LaAlO<sub>3</sub> at 5-10 GHz in the temperature range 77-300K. No temperature hysteresis in either ε<sub>r</sub> or tanδ was observed. The effects of inhomogeneity in the samples were studied, especially effects on the loss tangent. The accuracy of the ε<sub>r</sub> measurements are 5%; the tans accuracy is ± 0.5 x 10<sup>-5</sup>. Based on our results at 77K, alumina (tanδ = 0.229x10<sup>-4</sup>, ε<sub>r</sub> = 9.72) and MgO (tanδ = 0.414x10<sup>-4</sup>, ε<sub>r</sub>= 9.613) are suitable. Results on the loss tangent of LaAlO<sub>3</sub> were inconclusive because of inhomogeneities in the crystal.</p>
Degree
thesis:*- Name thesis:degree_name
- Master of Science in Electrical Engineering - (M.S.)
- Discipline thesis:degree_discipline
- Electrical and Computer Engineering
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Kaur, Sukhmani
- Contributors dc:contributor
-
- Edip Niver
- Aly Fathy
- James R. Matey
Subjects
dc:subject × 6Identifiers
dc:identifier.*- Repository record dc:identifier
- https://digitalcommons.njit.edu/theses/2782