Back to search

NJIT

Formation and characterization of thin superconducting Y-Ba-Cu-O films

Abstract

dc:description.abstract

<p>Thin Y-Ba-Cu-O superconducting films were fabricated reproducibly on MgO (100) substrates by two different processes ; (1) deposition at a low substrate temperature fiom a single sintered YBa<sub>2</sub>Cu<sub>3.3</sub>O<sub>x</sub> target using RF diode reactive sputtering followed by a post-annealing at around 830 ° C ; (2) deposition at the crystallization temperature under oxidizing atmosphere. The superconducting properties of films deposited by process (1) and (2) were studied. The variation of film composition and thickness as a function of distance from the target gas pressure and distance between target and substrate was studied. The Dependence of the film composition and deposition rate on the substrate temperature was studied.</p><p>Film crystal structures were characterized by X-ray diffraction using a Cu Kα source and compositions were determined by Rutherford backscattering spectroscopy ( RBS ). Transition temperature ( T<sub>c</sub> ) was determined by four-probe resistance measurement. Parameters for sputter deposition of the highest Tc Y-Ba-Cu-O films were ; substrate temperature, 130 ° C; sputtering gas mixture, 10 m Torr (10% oxygen 90% Argon); distance between cathode and anode, 2.5 inch; target power density, 4.87 watts/cm<sup>2</sup>. The deposition rate was in the range of 2.4 - 2.6 nm/min. The post-deposition annealing was carried out under these condition; oxygen pressure > 100. Torr; temperature, 830 ° C for 10 min; warmming rate, 2.3 ° C/min; cooling rate, 5 ° C/min. Ba and Cu deficiencies were observed in the films deposited at the crystallization temperature. Post-deposition high temperature treatment results in poor surface morphoology, cracking, or undesirable interdiffusion, and limits the choice of substrate material.</p><p>It was concluded that the prefered deposition condition for a high quality thin superconducting YBa-CU-0 films with our RF diode sputtering system is the process (2) using target with Cu and Ba contents increased.</p>

Degree

thesis:*
Name thesis:degree_name
Master of Science in Electrical Engineering - (M.S.)
Discipline thesis:degree_discipline
Electrical and Computer Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Kim, Gyusuk
Contributors dc:contributor
  • Kenneth Sohn
  • Roy H. Cornely
  • Marek Sosnowski

Subjects

dc:subject × 5

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/2784

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Kim, Gyusuk. Formation and characterization of thin superconducting Y-Ba-Cu-O films. https://digitalcommons.njit.edu/theses/2784