NJIT
The design and fabrication of a cell to measure the thermal conductivity of viscous fluids
Abstract
dc:description.abstract<p>The purpose of this investigation was to design and construct a device to measure the thermal conductivity of viscous fluids. The thermal conductivity data obtained with this device will be used in later work on predicting film coefficients of heat transfer to non-Newtonian fluids.</p><p>A cell of the concentric cylinder type was fabricated. Main features of the cell are: two concentric bronze cylinders separated by a 1/8 inch annular space, a central water capable of producing a 10° C temperature gradient in the annular space, and two guard heaters on individual rheostats to control the end looses. The temperatures are measured by calibrated thermocouples and the heat flux by measuring the heat flux by measuring the electrical input to the center heater. All electrical potentials are measured with Leeds and Northrup k-3 potentiometer.</p><p>The cell has two limitations:</p><p>1) The fluids measured must have a viscosity greater than 25 centipose.</p><p>2) The temperature gradient in the annular space must not exceed 10°C.</p><p>The probable error in the measured conductivity was calculated to be ±5.0%. It. A "known" liquid was tested, giving an average error of ±4.7%.</p>
Degree
thesis:*- Name thesis:degree_name
- Master of Science in Chemical Engineering - (M.S.)
- Discipline thesis:degree_discipline
- Chemical Engineering
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Hagedorn, Donald William
- Contributors dc:contributor
-
- Jerome J. Salamone
- Joseph Joffe
- George C. Keeffe
Subjects
dc:subject × 3Identifiers
dc:identifier.*- Repository record dc:identifier
- https://digitalcommons.njit.edu/theses/2805