Abstract
dc:description.abstract<p>The adaptive FIR digital filter is designed to suppress the noise in the tape recording and audio communication systems. The cutoff frequency of the digital FIR filters can be varied adaptively depending on the energy level of the input signal. In audio communication, especially, in tape recording systems, the noise obviously gets much bigger, when the frequency band of the system increases. The noise reduction system makes use of a phenomenon called masking, where the big signal-to-noise ratio makes human ears not sensitive to the noise. In a constant interval time, the system detects the signal level and compares the signal level with a set of threshold values, then, selects one of the digital FIR filters in order to make the signal-to-noise ratio large. If the signal level is less than about -30dB or -40dB, the system attenuates this extremely weak signal, because this signal level is very close to the noise level, and it is felt that it is preferable to hear a pause rather than noise.</p><p>We design the FIR digital filters and simulate the FIR digital filters. In the appendix, we implement the adaptive FIR digital filters with TMS320C25 DSP microprocessor software assembler language and hardware design.</p>
Degree
thesis:*- Name thesis:degree_name
- Master of Science in Electrical Engineering - (M.S.)
- Discipline thesis:degree_discipline
- Electrical and Computer Engineering
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Pang, Jack Jiabing
- Contributors dc:contributor
-
- Joseph Frank
- Stanley S. Reisman
- Sol Rosenstark
Subjects
dc:subject × 5Identifiers
dc:identifier.*- Repository record dc:identifier
- https://digitalcommons.njit.edu/theses/2886