Back to search

NJIT

Stepping motor control and position monitoring

Abstract

dc:description.abstract

<p>Stepping motors provide precise digital control of speed, without speed detector feedback. A stepping motor can produce a large torque for a relatively small displacement, without a shaft-position sensor or special compensation. This provides accurate control of motor position. This thesis describes the development of stepping motor torque characteristics and the different approaches stepping motor phase current waveform detection. It is shown that one of the most useful indicators of rotor position is the initial rate of current rise. The Hybrid, Permanent-magnet and Variable-reluctance step motors have been applied in the drive circuits. The open-loop control circuits are implemented to realize the speed and position control. The measurement of step motor characteristics need some sophisticated instruments; here some basic measurements without complicated instruments are investigated.</p>

Degree

thesis:*
Name thesis:degree_name
Master of Science in Electrical Engineering - (M.S.)
Discipline thesis:degree_discipline
Electrical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Feng, Pei-Kuan
Contributors dc:contributor
  • Walid Hubbi
  • Edwin Cohen

Subjects

dc:subject × 2

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/3068

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Feng, Pei-Kuan. Stepping motor control and position monitoring. https://digitalcommons.njit.edu/theses/3068