Back to search

NJIT

Simulation of a microprocessor controlled drill press

Abstract

dc:description.abstract

<p>The concept of flexible manufacturing systems has ushered new dimensions into machine tool design. The power of this new technique is that a high degree of flexibility in a machine tool can be easily achieved by developing a software based control system as against conventional hard wired systems in existence.</p><p>To demonstrate this point, a microprocessor based control system is developed, in this thesis, to control the automated drill press. The Motorola MC6808 8-bit microprocessor is chosen as an example.</p><p>The microprocessor first evaluates the optimum cutting parameters for the given cutter size, work material and operation. It then uses a look-up table, which can be considered as data base, to evaluate the cutting parameters. The domain of applicability can be easily enhanced by expanding the look-up table.</p><p>The microprocessor controls two DC motors for the cutting speed and feed respectively. The speed and direction of the motor is controlled by digital bit patterns stored in the look-up table. The corresponding digital value is converted into an analog voltage through D/A converter and fed into a power amplifier to drive the motor.</p><p>The advantage of this system is that it permits a high level of automation because of the ease with which it can be integrated with a Computer Aided Manufacturing (CAM) system. It also reveals the frontiers of the microprocessor applications beyond the point to point Flexible Manufacturing System (FMS) machine, e.g. a drill press to 2D and S-D continuous path FMS machines.</p>

Degree

thesis:*
Name thesis:degree_name
Master of Science in Mechanical Engineering - (M.S.)
Discipline thesis:degree_discipline
Mechanical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Ayyagari, Arun J.
Contributors dc:contributor
  • Sachio Nakamura
  • Bernard Koplik
  • Roman Dubrovsky

Subjects

dc:subject × 5

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/3121

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Ayyagari, Arun J.. Simulation of a microprocessor controlled drill press. https://digitalcommons.njit.edu/theses/3121