Back to search

NJIT

Investigation of the characteristics of the kerf and the surface generated in the course of cutting titanium with abrasive waterjets

Abstract

dc:description.abstract

<p>The effect of cutting parameters on the quality of cut in the course of cutting Titanium (Gr.2) with Abrasive Waterjet is investigated. The cutting parameters include nozzle traverse rate, size and feed rate of abrasives and nozzle(s) diameter. The width of kerf (top and bottom ), taper and roughness is studied. The measurements are tabulated and plots are made to study the trend and relationship for each set of parameters.</p><p>The qualitative conclusions are made successfully but no quantitative relationship was derived. Suggestions are made for the evaluation of technology for feasibility and economic justification, and to achieve desired cutting and quality requirement for any particular cutting application. An approach is given to develop an efficient and more application oriented experimental procedure.</p><p>Considering the state-of-art in abrasive waterjet cutting technology, the description of technology is briefly carried out and comments are made.</p>

Degree

thesis:*
Name thesis:degree_name
Master of Science in Mechanical Engineering - (M.S.)
Discipline thesis:degree_discipline
Mechanical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Vora, Ajay
Contributors dc:contributor
  • E. S. Geskin
  • Robert P. Kirchner
  • Rajesh N. Dave

Subjects

dc:subject × 5

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/3230

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Vora, Ajay. Investigation of the characteristics of the kerf and the surface generated in the course of cutting titanium with abrasive waterjets. https://digitalcommons.njit.edu/theses/3230