Abstract
dc:description.abstract<p>Latex modified concrete and polymer concrete have been widely used for bridge deck overlays and crack repairs for the past decade. In recent years, many of these repaired structures were found to be defective. The causes of these failures are not clearly confirmed. Some blame the quality of the latex products while manufacturers accuse the contractors of improper placement and/or surface preparation. While most of these failures largely appeared to be debonding and delamination of the overlays, excessive cracks, possibly shrinkage cracks, were also reported in the overlaid LMC.</p><p>To evaluate the suitability of using latex modified concrete for crack repairs and overlays, this study is aimed at investigating the mode of failure in overlaid composites such as LMC, and normal concrete. Attempt will also be made to resolve the severe shrinkage and debonding problems by introducing hooked-end steel fibers in the overlaid cementitious composites. Several series of experiments were conducted with different types of overlaid materials.</p><p>Test results using latex with styrene butadience indicate that latex modified concrete is not suitable for crack repairs due to poor bonding, low strength, and excessive shrinkage. The quality of LMC using the recommended mix-proportion is poor and inconsistent. The addition of fibers to both normal concrete and LMC provides excellent overlaid materials which have reduced shrinkage cracks and improved bond between the overlay and the original concrete.</p>
Degree
thesis:*- Name thesis:degree_name
- Master of Science in Civil Engineering - (M.S.)
- Discipline thesis:degree_discipline
- Civil and Environmental Engineering
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Lo, Chen-Hoang
- Contributors dc:contributor
-
- Methi Wecharatana
- Charles Franklin Peck
- C.T. Thomas Hsu
Subjects
dc:subject × 4Identifiers
dc:identifier.*- Repository record dc:identifier
- https://digitalcommons.njit.edu/theses/3258