Abstract
dc:description.abstract<p>Columns with two types of transverse grooves are analyzed: a one-sided groove whose bottom is parallel to a vertical plane and cross-section is constant, and a concentric uniform groove. Then, for illustration and to be more specific, round columns are selected such that the cross-section becomes partially circular, for one-sided grooves and totally circular for a concentric groove. The columns are simply supported at both ends and subjected to a compressive eccentric load P at eccentricity e. The static equilibrium of such columns is studied via two types of solutions: the solution to three-segment column and a substantially simpler but approximate solution for a modi-fied model that takes into consideration the narrowness of the groove. In the modified model, the groove is replaced by an elastic spring-hinge which leads to simpler solutions not significantly different from the exact results.</p><p>Equations are obtained for determining the maximum allowable load, and corresponding graphs are presented, based on buckling or on a stress-limiting criterion. The results generated by both types of solutions agree within 5%.</p>
Degree
thesis:*- Name thesis:degree_name
- Master of Science in Mechanical Engineering - (M.S.)
- Discipline thesis:degree_discipline
- Mechanical Engineering
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Baaklini, Clovis Georges
- Contributors dc:contributor
-
- Harry Herman
- Michael Pappas
- Bernard Koplik
Subjects
dc:subject × 3Identifiers
dc:identifier.*- Repository record dc:identifier
- https://digitalcommons.njit.edu/theses/3385