Abstract
dc:description.abstract<p>The geotechical construction problem of rock fracturing caused by pile driving is investigated using a laboratory model. One inch diameter closed bottom steel pipes were driven into a simulated rock mass consisting of masonry bricks having an average compressive strength 3,200 psi. Both single pile and five pile model groups were tested. The single pile tests indicated that a threshold of penetration behavior occurred at a theorical hammer energy of 100 ft-lb and this was used for the group tests. Penetration rates were measured using an optical level.</p><p>Piles in the five pile model group were initially driven to a penetration resistance of 9 blows/ 1/8 inch. The piles were then redriven in the original order to the same penetration resistance. All piles in the group exhibited a definite relaxation upon redriving which is attributed to mechanical disturbance of the rock mass beneath previously driven piles. Progressive fracturing and slight heaving of the rock mass were observed.</p><p>Comparison is made between model test data and actual field driving data from a project where rock fracturing occurred. The similarity of behavior indicate that the model does simulate the field problem of rock fracturing. Recommendations are made for future model testing.</p>
Degree
thesis:*- Name thesis:degree_name
- Master of Science in Civil Engineering - (M.S.)
- Discipline thesis:degree_discipline
- Civil and Environmental Engineering
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Lee, Dai-Heyng
- Contributors dc:contributor
-
- John R. Schuring
- Dorairaja Raghu
- R. John Craig
Subjects
dc:subject × 4Identifiers
dc:identifier.*- Repository record dc:identifier
- https://digitalcommons.njit.edu/theses/3448