Back to search

NJIT

Basic concepts in CAD & CAM

Abstract

dc:description.abstract

<p>As the computer revolution is nearing its end, CAD/CAM concepts are being widely accepted and evolving rapidly. This thesis begins with a disscussion of the significance and advantages of CAD/CAM and their relationship with automation. Hardware and software components involved are then introduced. Product design under CAD is done by computers. Computers perform engineering analysis, necessary calculations, and dynamic simulation to complete the complex design. The geometric elements and operational primitives are provided by a data base system. The major components of CAM are then introduced. The term CAM is used in a broader sense to include CAPP, MRP, NC, Robots and CAQC. Within CAPP, Group Technology serves as the foundation. An example generative CAPP system, XPS-1, is then used to show how a decision model is employed to generate a process plan. After introducing the elements of computerized MRP, a comparison is made between the MRP system, the order point system and the Toyota management system.</p><p>After years of independent development, it has become apparent that an interface between CAD and CAM is both valuable and indispensable. A survey of various CAD/CAM standard interfaces are then given. These include GKS, PHIGS, VDI, VDM, NAPLPS, and IEGS.</p><p>It is well known that the manufacturing environment today has to meet the requirements of both product complexity and shortened product life cycles. From this study it is apparent that CAD/CAM provides a key partial solution to these problems.</p>

Degree

thesis:*
Name thesis:degree_name
Master of Science in Industrial Engineering - (M.S.)
Discipline thesis:degree_discipline
Industrial and Management Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Liu, Chao-Ming
Contributors dc:contributor
  • Stan S. Thomas

Subjects

dc:subject × 2

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/3449

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Liu, Chao-Ming. Basic concepts in CAD & CAM. https://digitalcommons.njit.edu/theses/3449