Back to search

NJIT

Further development of preparation and measurement techniques for triode-sputtered mercury cadmium telluride thin films

Abstract

dc:description.abstract

<p>The modified MRC 8800 R.F. triode sputtering system was used for mercury vapor sputtering (Hg<sup>1-x</sup>Cd<sup>x</sup>)Te targets onto N-type (111) silicon substrates with a resistivity of 70 to 90 ohm-cm. Deposition rates were in the 2.6 to 3.6 A/sec range, A Hall mobility value, at 87°K, of 2550 Cm<sup>2</sup>/V•sec with a carrier concentration of 7(10<sup>15</sup>) cm<sup>-3</sup> was obtained for 9 μm thick films with an X-value of 0.25. Obtaining good sputtered films reliably was dependent on having targets that would not crack when bombarded with mercury ions. Improvements in the methods used to prepare the pressed powder targets were made and over 90% of the targets did not crack in sputtering runs when they were used for 6 to 18 hours of operation.</p>

Degree

thesis:*
Name thesis:degree_name
Master of Science in Electrical Engineering - (M.S.)
Discipline thesis:degree_discipline
Electrical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Chan, Tai-On
Contributors dc:contributor
  • Roy H. Cornely

Subjects

dc:subject × 3

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/3461

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Chan, Tai-On. Further development of preparation and measurement techniques for triode-sputtered mercury cadmium telluride thin films. https://digitalcommons.njit.edu/theses/3461