Back to search

NJIT

Preparation of aniline-formaldehyde ion-exchanger fiber : part I : polymer synthesis and fiber curing

Abstract

dc:description.abstract

<p>Aniline-Formaldehyde polymer was synthesized by a new procedure ( as opposed to the conventional approach ). With an equal molar ratio of aniline and formaldehyde and a small amount of oxalic acid, the resulted polymer is free from gels and is suitable for fiber transformation.</p><p>The polymer is a transparent yellowish resin, having a melting range between 100-115C, and an average molecular weight 1200. The polymer was intended to be the precursor material for ion-exchange fibers. However, due to the time limit, this thesis only covers the work of polymer synthesis, fiber spinning and the identification of an crosslinker.</p><p>Among half an dozen of potential crosslinking agents, acetaldehyde has been singled out as the most effective crosslinker for the fiber spun from the polymer. The fiber has an tensile strength 21,000psi and elongation 11.4% and is suitable for further conversion into ion-exchangers.</p>

Degree

thesis:*
Name thesis:degree_name
Master of Science in Engineering Science- (M.S.)
Discipline thesis:degree_discipline
Chemical Engineering and Chemistry

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Chen, Ching-Hsin
Contributors dc:contributor
  • George Y. Lei
  • Ching-Rong Huang
  • Chen-Chong Lin

Subjects

dc:subject × 4

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/3508

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Chen, Ching-Hsin. Preparation of aniline-formaldehyde ion-exchanger fiber : part I : polymer synthesis and fiber curing. https://digitalcommons.njit.edu/theses/3508