NJIT
Design and construction of an atomic nitrogen source for ion cluster beam deposition of thin film nitrides
Abstract
dc:description.abstract<p>The objective of this thesis research was to generate atomic nitrogen to react with Ga being deposited by an Ion Cluster Beam method to prepare GaN thin films. An experimental reactor was designed and constructed to generate atomic nitrogen by making use of a microwave induced discharge to dissociate molecular nitrogen into atomic nitrogen. The concentration and the flow rate of the atomic nitrogen arriving at the substrate were measured by titration with nitrous oxide. The experiments were done with 0.32 square cm quartz tubing at room temperature over the nitrogen pressure range from 0.14 torr to 0.56 torr. Results of the experiments indicate that the maximum atomic nitrogen flux produced was 2.4 x 10<sup>15</sup> atoms/(cm<sup>2</sup>.sec). The ratio of the atomic nitrogen flux out of the microwave cavity to the entering molecular nitrogen flux was between 1% to 3%. It was concluded that the flux of Ga atoms arriving at a one square cm substrate could be about 5.0 x 10<sup>14</sup> atoms per (cm<sup>2</sup>.sec.) for a GaN growth rate of one micron per hour.</p>
Degree
thesis:*- Name thesis:degree_name
- Master of Science in Electrical Engineering - (M.S.)
- Discipline thesis:degree_discipline
- Electrical Engineering
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Elgharib, Sahar
- Contributors dc:contributor
-
- Roy H. Cornely
- Joseph W. Bozzelli
- W. H. Warren Ball
Subjects
dc:subject × 5Identifiers
dc:identifier.*- Repository record dc:identifier
- https://digitalcommons.njit.edu/theses/3576