Back to search

NJIT

Optimization of the sputtering technology for preparation of Hg1-[subscript x] Cd[subscript x] Te Heterojunction diodes

Abstract

dc:description.abstract

<p>The deposition of (Hg<sub>1-x</sub>Cd<sub>x</sub>)Te onto Si and (Hg<sub>1-y</sub>Cd<sub>y</sub>)Te (x>y) substrates by rf triode sputtering was studied. Ionized mercury vapor, in the 0.6 to 1.2 micron pressure range, was used to bombard pressed-powder targets, consisting of HgTe and CdTe particles, with effective target x value of 0.3, 0.35, and 0.4. The sputtering procedure, parameters, and system were modified to optimize film characteristics. Higher substrate temperature (270°C) was required to obtain metallic gray films with x>0.3. With substrate temperatures less than 270°C and deposition rates 0.5-1.0 micron per hour the films were brown in color with high resistivity. A large number of diodes, prepared with a 0.4 target and 0.2 substrate, were fabricated. I-V measurements revealed that the diodes had a nonrectifying potential barrier with resistance of several megohms. Futher experiments and testing are necessary to determine the cause of the barrier and to further understand the deposition parameters affecting sputtered heterodiode properties.</p>

Degree

thesis:*
Name thesis:degree_name
Master of Science in Electrical Engineering - (M.S.)
Discipline thesis:degree_discipline
Electrical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Kokkinos, Kyriacos
Contributors dc:contributor
  • Roy H. Cornely
  • W. H. Warren Ball

Subjects

dc:subject × 6

Identifiers

dc:identifier.*
Repository record dc:identifier
https://digitalcommons.njit.edu/theses/3585

Chain of custody

source
Harvested from
NJIT
Base URL
digitalcommons.njit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Kokkinos, Kyriacos. Optimization of the sputtering technology for preparation of Hg1-[subscript x] Cd[subscript x] Te Heterojunction diodes. https://digitalcommons.njit.edu/theses/3585