Abstract
dc:description.abstract<p>This research thesis on composite steel-fibrous concrete is based on a series of beam tests conducted in the Structural and Concrete Laboratory of the New Jersey Institute of Technology.</p><p>In the first series of tests, two twenty-foot two-span continuous beams were tested. In the first beam, plain reinforced concrete was used in the construction of the composite beam. The second beam had 1.5% by volume of steel fibers in the concrete.</p><p>In the second series, four composite T-beams were tested. Two of the beams had 1% of steel fibers by volume. The other two beams were constructed using plain concrete. Sufficient welded stud shear connectors and standard reinforcement steel were used in the fabrication of all the beams.</p><p>The flexural behavior, shear behavior and mode of failure for each beam were observed. The reinforced fiber concrete-steel composite beams were compared to the conventional reinforced concrete-steel composite beams. The load vs. centerline deflection, load vs. rotation, and load es. strain across the section were used for comparison.</p><p>From the analysis of the results, it can be concluded that the composite fibrous concrete-steel beams had:</p><p>1. higher moment capacity</p><p>2. higher shear strength</p><p>3. more ductility</p><p>4. increased bond of reinforcement</p><p>5. improved crack control</p><p>6. improved control of spalling</p><p>7. a very gradual failure in tension since the bonding of fibers was adequate</p>
Degree
thesis:*- Name thesis:degree_name
- Master of Science in Civil Engineering - (M.S.)
- Discipline thesis:degree_discipline
- Civil and Environmental Engineering
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Mookerjee, Avijit
- Contributors dc:contributor
-
- R. John Craig
- C.T. Thomas Hsu
- Methi Wecharatana
Subjects
dc:subject × 3Identifiers
dc:identifier.*- Repository record dc:identifier
- https://digitalcommons.njit.edu/theses/3593