Back to search

University of North Dakota

Sintering Characteristics of Lignite Ash

Abstract

dc:description.abstract

The relationship of the sintering characteristics of lignite ash to the known fouling tendency of the ash was investigated. The investigation includes the determination of the temperature at which sintering begins and the correlation of fouling tendency of the ash to the compressive strength developed during the sintering of ash specimens. The significance of sample preparation, sodium content, and treatment temperature was determined by statistical analysis of the data. The temperature at which sintering begins was determined for samples of ash prepared in the laboratory. Differences in this sinter temperature were observed for samples with different fouling tendencies. The sinter point could not be determined for samples of ash which had been prepared by other methods from the same coal. Compressive strengths developed during sintering were very similar for samples of high-sodium content fly ash and high-sodium content laboratory ash. The sinter strengths of the low-sodium counter-parts of these two ashes were also very similar. The differences in sinter strength developed for the high- and low-sodium content samples of each type of ash also gives a clear indication of the relative fouling tendency. An analysis of the variance of the sinter strength data indicates that sodium level, sample preparation method and treatment temperature all have a significant effect on the sinter strength. The relative fouling tendency of lignite ash can be measured using samples of ash prepared is the laboratory, by wither determining the sinter point or the sinter strength developed.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Chemical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Odenbaugh, Merwin L.

Identifiers

dc:identifier.*
Repository record dc:identifier
https://commons.und.edu/theses/557

Chain of custody

source
Harvested from
University of North Dakota
Base URL
commons.und.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Odenbaugh, Merwin L.. Sintering Characteristics of Lignite Ash. Thesis thesis, https://commons.und.edu/theses/557