Back to search

University of North Dakota

On The Design Of Novel Multifunctional Materials By Using Particulate Additives

Abstract

dc:description.abstract

This thesis has been organized into five chapters. The main focus of this thesis is to design novel multifunctional materials by using particulate additives. Chapter 1 is devoted to reviewing recent studies in additive manufacturing (AM) and other background information. In Chapter 2, the synthesis and characterization of novel Ti3SiC2-reinforced Zn-matrix composites is reported. During this study, all the Zn composites were hot pressed at 500oC for 5 min at a uniaxial pressure of ~150 MPa. Microstructure analysis by SEM (Scanning Electron Microscopy) and phase analysis by XRD (X-ray Diffraction) confirmed that there was minimal interfacial reaction between Ti3SiC2 particles and the Zn matrix. The addition of Ti3SiC2 improved the tribological performance of these composites against alumina substrates but did not have any beneficial effect on the mechanical performance. The addition of Ti3SiC2 particulates to metal and polymer matrices show interesting properties. Chapter 3 will focus on additive manufacturing of Ti3SiC2 particulates in a polymer matrix. Waste materials are a big problem in the world. Chapters 4 and 5 focus on recycling materials. The mechanical and tribological properties of the Resin-Nylon and ResinPolyester composites are reported, respectively.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Mechanical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Dunnigan, Ross D.
Contributors dc:contributor
  • Surojit Gupta

Subjects

dc:subject × 1

Identifiers

dc:identifier.*
Repository record dc:identifier
https://commons.und.edu/theses/1890

Chain of custody

source
Harvested from
University of North Dakota
Base URL
commons.und.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Dunnigan, Ross D.. On The Design Of Novel Multifunctional Materials By Using Particulate Additives. Thesis thesis, https://commons.und.edu/theses/1890