Back to search

University of North Dakota

Heat Transfer And Pressure Drop Measurements In A High-Solidity Pin-Fin Array With Variable Hole Size Incremental Impingements

Abstract

dc:description.abstract

Gas turbines play a very critical role in the current energy sector in both power generation and in propulsion for almost the entire commercial and military aviation industry. Higher efficiencies can be developed from gas turbines, either land based or aero-propulsion by raising both the pressure and the temperature of combustion gases which discharge into the turbine section, which is also known as the Turbine Entry Temperature (TET). Turbine blade materials simply cannot operate safely at current TET’s of 3000 °F without implementing comprehensive cooling schemes developed in the industry over the years. Normally some of the compressed air is extracted from the compressor discharge and forced into internal cooling passages including serpentine passages in blades to cool the hottest engine components to a safer range in metal temperatures. Often, a portion of air is forced out from an array of tiny holes concentrated in the leading edge of blade aimed to provide internal cooling and a thin layer of protection from hot combustion gases while the rest of the coolant is delivered internally for convection to cool component surfaces to a sustainable temperature. However, the leading edge is quite susceptible to deposition of contaminants from the combustion products which can buildup and plug film cooling discharge holes. In addition, the surface of the leading region experiences intense turbulence, and the turbulence disrupts the film cooling layer from forming stably and protecting the blade surfaces.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Mechanical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Sheikhmohamed, Abdulqadir
Contributors dc:contributor
  • Forrest E. Ames

Identifiers

dc:identifier.*
Repository record dc:identifier
https://commons.und.edu/theses/2345

Chain of custody

source
Harvested from
University of North Dakota
Base URL
commons.und.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Sheikhmohamed, Abdulqadir. Heat Transfer And Pressure Drop Measurements In A High-Solidity Pin-Fin Array With Variable Hole Size Incremental Impingements. Thesis thesis, https://commons.und.edu/theses/2345