Back to search

University of North Dakota

Bench Scale Study of Fast Fluidization

Abstract

dc:description.abstract

The technique of fast fluidization in gas-solid contacting was investigated. Behavior of ground sand (44-150 microns), fluid cracking catalyst (30-100 microns), and lignite (5-75 microns) in dense and fast fluidized conditions were studied.Pressure drop measurements were made in dense fluidized beds of these particles. Incipient fluidization velocity ranged from 0.033 ft./ sec. to 0.066 ft./sec., depending on the properties of the particles. Increase in bed heights were up to 100 percent of the static bed heights.Pressure drops and bed densities were measured for different air flows and solid flows during fast fluidization of these materials. Critical velocities of the fluidizing medium, air, which marks the lower limit of the fast fluidization range were determined to be approximately 3.5 ft./sec. for catalyst particles and about 4 ft./sec. for lignite. In the entrained state, high slip velocities were observed indicating extensive back mixing.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Chemical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Natarajan, Subramaniam

Identifiers

dc:identifier.*
Repository record dc:identifier
https://commons.und.edu/theses/2809

Chain of custody

source
Harvested from
University of North Dakota
Base URL
commons.und.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Natarajan, Subramaniam. Bench Scale Study of Fast Fluidization. Thesis thesis, https://commons.und.edu/theses/2809