Back to search

University of North Dakota

Steam Drying of Lignite

Abstract

dc:description.abstract

North Dakota lignite, (,-lV x 1") in size and having 35 percent initial moisture content, was steam dried by the Fleissner process at elevated temperatures and pressures. The reduction in moisture content of lignite was investigated as a function of the residence time and the drying temperature. The residence time was varied from 10 to 30 minutes and the drying temperature from 220° to 270°C. It was determined that decrease in moisture content was independent of drying times longer than 20 minutes and drying temperatures below 250°C. The reduction in moisture content increased at higher temperatures. It varied from 45 to 73 percent for varying conditions. The linear shrinkage of lignite was observed to be between 10 and 15 percent. Steam dried lignite did not significantly reabsorb moisture. Residual water and vent gas were analyzed.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Chemical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Sapatnekar, Sunil V.

Identifiers

dc:identifier.*
Repository record dc:identifier
https://commons.und.edu/theses/3055

Chain of custody

source
Harvested from
University of North Dakota
Base URL
commons.und.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Sapatnekar, Sunil V.. Steam Drying of Lignite. Thesis thesis, https://commons.und.edu/theses/3055