Back to search

University of North Dakota

Synthesis And Characterization Of PEEK Based Functional Composites For Biomedical Applications

Abstract

dc:description.abstract

We report the synthesis and characterization of PEEK-MAX (Ti3SiC2, Ti3AlC2,and Cr2AlC), and PEEK-MoAlB, (DDGS500 – pyrolyzed Distiller’s dried grains with soluble (DDGS)), metal (Mo) and PEEK-ceramic (Xonotlite) based PEEK composites, by hot-pressing. A systematic study was done to understand the effect of these additives on functional and mechanical properties. Initially, these composites were synthesized by hot pressing. Detailed microstructure analysis by scanning electron microscopy showed that at higher concentration (≥10 vol%), the Ti3SiC2, Ti3AlC2 and PEEK-MoAlB particles segregated at the phase boundaries and formed interpenetrating micro-networks. PEEK-Cr2AlC were well dispersed in the PEEK matrix. Microstructure study of the composites showed that DDGS500 powder particulates were well dispersed within the PEEK matrix after the addition of 5 vol%. However, at higher concentration of 10 and 20 vol%, the particles segregated at the phase boundaries. Mo and Xonotlite particles were segregated at the phase boundaries even at 5 vol% concentration. The addition of MAX phases or MoAlB reduced the crystallization temperature and melting point of these composites. PEEK reinforced with 10 vol% Ti3SiC2, Ti3AlC2 and MoAlB showed plastic failure, and higher strength than PEEK. Comparatively, PEEK reinforced with 10 vol% Cr2AlC did not show any enhancement. All the PEEK-MAX and PEEK-MoAlB composites showed triboactive behavior and enhanced wear resistance. The addition of DDGS500, PEEK-Mo and PEEK-Xonotlite particulates lowered the wear rate until 10 vol% by several orders of magnitude and stabilized the friction coefficient (μ) versus distance profile. PEEK-20 vol% Xonotlite which showed hydrophilic behavior with a decrease in contact angle as a function of time which shows that Xonotlite can be a promising additive for increasing hydrophilicity of PEEK based composites for biomedical applications. PEEK composites fluid lubrication tribology behavior was also studied in the presence of distilled deionized water and simulated body fluid (SBF). PEEK composites showed improvement in the tribological behavior. In addition, PEEK composites immersed in SBF, also shown formation of bone growth.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy (PhD)
Level thesis:degree_level
Dissertation
Discipline thesis:degree_discipline
Biomedical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Javaid, Sabah
Contributors dc:contributor
  • Surojit Gupta
  • Naima Kaabouch

Subjects

dc:subject × 6

Identifiers

dc:identifier.*
Repository record dc:identifier
https://commons.und.edu/theses/4347

Chain of custody

source
Harvested from
University of North Dakota
Base URL
commons.und.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Javaid, Sabah. Synthesis And Characterization Of PEEK Based Functional Composites For Biomedical Applications. Dissertation thesis, https://commons.und.edu/theses/4347