Back to search

University of North Dakota

Design And Fabrication Of TPMS-Based Bone Scaffolds: A Cost-Effective Approach Using PLGA-nHA And 3d-Printed PVA Molds

Abstract

dc:description.abstract

This thesis introduces a new cost-effective method for fabricating bone scaffolds from triply periodic minimal surface (TPMS) geometries—namely Gyroid and Diamond structure—using a poly(lactic-co-glycolic acid)-nanohydroxyapatite (PLGA-nHA) composite and 3D-printed polyvinyl alcohol (PVA) molds. Current TPMS scaffold fabrication techniques depend on costly laser-based techniques like selective laser sintering and thus remain inaccessible. Herein, we reveal a cost-effective and repeatable indirect approach via fused deposition modeling (FDM) for printing water-soluble PVA molds, which are then iteratively cast filled with a PLGA-nHA solution. The protocol was optimized through concentration modulation and controlled evaporation of the solvent for optimum infiltration and uniformity in the scaffolds. Two main goals motivated this work: first, automate and optimize scaffolding through bioprinting and second, design and test TPMS scaffolds versus conventional lattice geometries. The automated casting approach decreased variability and material loss and doubled the scaffolding's thickness and decreased processing time by over fivefold as compared to manual casting. Integrity of the structure and composition were confirmed through Fourier-transform infrared spectroscopy (FTIR), light microscopy and compression testing and were found to be superior in Diamond scaffolds (1.0 MPa compressive strength and 0.25 MPa modulus) when compared with lattices. Cell adhesion and viability in vitro assays showed good adhesion and viability of cells through all scaffolds and TPMS scaffolding showing better cell spreading and integration because of their better surface area and interconnected porosity. This study proves TPMS scaffolding fabricated through the presented method possesses better mechanical strength, high porosity and biocompatibility and very low cost of production. This sets the stage for accessibility of advanced scaffolding designs in the application of bone tissue engineering and future directions also could be extended to in vivo and long-duration degradation tests.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Biomedical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Ahmed, Yasser
Contributors dc:contributor
  • Ali S. Alshami
  • Ryan Striker

Subjects

dc:subject × 1

Identifiers

dc:identifier.*
Repository record dc:identifier
https://commons.und.edu/theses/7491

Chain of custody

source
Harvested from
University of North Dakota
Base URL
commons.und.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Ahmed, Yasser. Design And Fabrication Of TPMS-Based Bone Scaffolds: A Cost-Effective Approach Using PLGA-nHA And 3d-Printed PVA Molds. Thesis thesis, https://commons.und.edu/theses/7491