Back to search

University of North Dakota

Capture of alkali during pressurized fluidized-bed combustion using in-bed sorbents.

Abstract

dc:description.abstract

Pressurized fluidized bed combustion (PFBC) offers the ability to reach high system efficiencies while controlling both SO$\sb2$ and NO$\rm\sb {x}$ emissions. However, current technology does not allow the capture of alkali to the recommended level of 24 ppb set by turbine manufacturers. Aluminosilicate minerals have the potential to capture alkali, especially sodium and potassium, under conditions typical of the fluid bed (750 to 1000$\sp\circ$C). When alkalis and alkaline-earth elements react with aluminosilicate minerals, phases have been observed which result in the formation of sodalites, such as hauyne and nosean, that have cubo-octahedral structure capable of incorporating sulfate and chlorine anions.Thermal gravimetric analysis was used to study the mechanism of alkali capture using sodalite. Further testing was performed on a 3$\sp\prime\sp\prime$-diameter pressurized fluid-bed reactor. Early results indicated that simultaneous removal of alkali and sulfur and/or chlorine was not practical under the conditions for commercial PFBC operations. Therefore, the focus of the later part of this work was on sorbents that have been shown to capture alkali in other systems. The effectiveness of bauxite and kaolinite to reduce vapor phase alkali concentrations was determined. In addition to studying the gettering capability of the sorbent, the impact of the getter on operational performance was evaluated. This evaluation included examining potential agglomeration of bed particles, deposition on heat-transfer surfaces, and the bridging and blinding of ceramic candle filters.The overall conclusion from this work is that in-bed alkali getters can effectively reduce the vapor phase alkali concentrations. This reduction is of a magnitude great enough to control ash deposition and agglomeration and filter blinding, but not to a level low enough to meet current turbine manufacturer's recommendations for vapor phase alkali. Bauxite was the best getter tested based on its ability to control all of the above mentioned problems. Kaolinite is less effective because of its tendency to form sintered deposits from its fine fraction. Finally, although sodalite and nosean can be formed and result in combined sodium and chlorine or sulfur capture, they do not form at a rate high enough to make them effective getters under PFBC conditions.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy (PhD)
Level thesis:degree_level
Dissertation
Discipline thesis:degree_discipline
Chemical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Mann, Michael David
Contributors dc:contributor
  • Douglas K. Ludlow

Subjects

dc:subject × 1

Identifiers

dc:identifier.*
Repository record dc:identifier
https://commons.und.edu/theses/7753

Chain of custody

source
Harvested from
University of North Dakota
Base URL
commons.und.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Mann, Michael David. Capture of alkali during pressurized fluidized-bed combustion using in-bed sorbents.. Dissertation thesis, https://commons.und.edu/theses/7753