Monterey, CA; Naval Postgraduate School
STRESS-STRAIN RELATIONSHIPS IN ULTRA-HIGH MOLECULAR WEIGHT POLYETHYLENE FIBERS UNDER BALLISTIC LOADING
Abstract
dc:description.abstractUltra-high molecular weight polyethylene (UHMWPE) fibers are commonly used in body armor systems, alone or in combination with ceramic inserts, as ballistic protection against high-velocity projectiles. Under dynamic loading conditions, the fibers are extremely strong in tension, but the extreme pressures created at impact by ogive-shaped projectiles can cause premature failure before additional fibers can be recruited to distribute the force. A light gas gun was used to launch 9.525 mm steel spherical projectiles into a sample of 20 layered UHMWPE uniaxial fiber sheets (at 90-degree offset between layers) to examine the stress/strain behavior of the fabric over time. Load cells (4.4 kN) were used to measure uniaxial forces along the fibers. Two high-speed video cameras were used to measure both the in-plane and out-of-plane fiber deflection. Using numerical calculations of the total strain, stress was derived from published stress-strain curves and compared to the measured load cell force data, in both X and Y directions.
Degree
thesis:*- Name thesis:degree_name
- Master of Science in Applied Physics
- Level thesis:degree_level
- Masters
- Discipline thesis:degree_discipline
- Applied Physics
- Department dc:contributor.department
- Physics (PH)
- Grantor dc:publisher
- Monterey, CA; Naval Postgraduate School
- Year dc:date.issued
- 2018
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Walker, Matthew
- Advisor dc:contributor.advisor
-
- Gamache, Raymond M.
- Committee member dc:contributor.committeemember
-
- Crooker, Peter (Non-NPS)
Rights
dc:rights- Statement dc:rights
-
- Copyright is reserved by the copyright owner.
- Approved for public release; distribution is unlimited.
Identifiers
dc:identifier.*- Thesis Thesis Identifier
- 30568