Old Dominion University
Development of High Conductivity Copper Coatings for SRF Cavity
Abstract
dc:description.abstractThe development of metallic coatings with high purity and high thermal conductivity at cryogenic temperature could be very important for application to the superconducting radiofrequency (SRF) cavity technology. The deposition of such bulk coatings on the outer surface of a niobium cavity could result in higher heat conductance and mechanical stiffness, both of which are crucial for enhancing the cavity performance at a reduced cost. Cold spray technology was used to deposit bulk coatings of pure copper and copper-tungsten alloys on the niobium substrate and the samples of size 2 mm × 2 mm cross section were cut and subjected to annealing at various temperatures ranging from 300 ◦C to 1000 ◦C. Thermal conductivity and residual resistivity ratio (RRR) were measured for various samples. A maximum RRR value of ∼130 and ∼40 was measured for pure Cu samples and CuW samples, respectively. Scanning electron microscopy was used to analyze the grain growth, grain distribution and presence of contaminant particulates.
Degree
thesis:*- Name thesis:degree_name
- Master of Science (MS)
- Level thesis:degree_level
- Thesis
- Discipline thesis:degree_discipline
- Physics
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Pokhrel, Himal
- Contributors dc:contributor
-
- Gianluigi Ciovati
- Jean Delayen
- Yuan Zhang
Subjects
dc:subject × 4Rights
dc:rights- Statement dc:rights
-
- <p>In Copyright. URI: <a href="http://rightsstatements.org/vocab/InC/1.0/">http://rightsstatements.org/vocab/InC/1.0/</a> This Item is protected by copyright and/or related rights. You are free to use this Item in any way that is permitted by the copyright and related rights legislation that applies to your use. For other uses you need to obtain permission from the rights-holder(s).</p>
Identifiers
dc:identifier.*- Identifier
- 9798819394243