Back to search

Rochester Institute of Technology

Analysis of Connecting Rod Bearing Design Trends Using a Mode-Based Elastohydrodynamic Lubrication Model

Abstract

dc:description.abstract

Available design trends for big end connecting rod bearings utilize widely adopted rapid methods for prediction of minimum film thickness due to their superior speed and ease of use. However, they impose unrealistic assumptions such as surface rigidity, which could compromise the accuracy of results. The significance of structural elasticity and updated models was investigated using a mode based elastohydrodynamic lubrication model which includes body forces, mass conserving cavitation, and surface roughness. Eight physical connecting rods were modeled using finite element methods and simulated over a variety of conditions, varying engine speed, bearing clearance, and oil viscosity. The results show operating conditions where rapid methods can inaccurately predict minimum film thickness. Bearings operating at higher speeds and loads are subject to significant bearing deformation that influences minimum film thickness predictions. In certain low load conditions oil feed pressure can also have a significant effect on minimum film thickness results. Additionally, current parameters used to characterize bearing performance do not adequately characterize trends that include bearing deformation.

Degree

thesis:*
Name thesis:degree_name
Mechanical Engineering (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Mechanical Engineering (KGCOE)

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Blais, Travis M
Contributors dc:contributor
  • Stephen Boedo

Subjects

dc:subject × 7

Identifiers

dc:identifier.*
Repository record dc:identifier
https://repository.rit.edu/theses/20

Chain of custody

source
Harvested from
Rochester Institute of Technology
Base URL
repository.rit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Blais, Travis M. Analysis of Connecting Rod Bearing Design Trends Using a Mode-Based Elastohydrodynamic Lubrication Model. Thesis thesis, https://repository.rit.edu/theses/20