Back to search

Rochester Institute of Technology

Study of Damage Progression In CSCM Concretes Under Repeated Impacts

Abstract

dc:description.abstract

Reinforced Concrete (RC) is an important material in civil construction projects, and rigorous standards exist for rating the structural, wind, vibration, and cyclic design loads. In narrower applications, such as the design of protective saferooms, RC is also designed to bear impact loads which may be applied repeatedly. Although current experimental and computational methods allow for prediction of concrete damage from a single impact, there is no attempted study of damage progression from repeated impacts. Such a study is attempted on a well-defined slab impact test used in the rating of protection provided by RC walls. Multiple projectiles impact a chosen location and accumulating damage is predicted by means of numerical simulation. The simulation results are then correlated to an experimental test demonstrating similar effects. The classic projectile impact problem is taken as the basis for computational analysis. Nonlinear wood and concrete material models are substituted for the conventional steel projectile and target, and a damage variable is defined to track cumulative effects of plastic strain. The simulation is then extended to additional impacts while preserving the damaged state of the slab. The development of damage and accumulating strain energy is computed, until damage extends throughout the entire thickness of the slab. Since the contact period per impact is estimated to be under a millisecond, an explicit dynamics formulation of the problem is implemented in commercial software LS-DYNA. The concrete stresses are computed using the Reidel-Hermaier-Thoma Model (RHT), which incorporates a smooth geologic cap model to provide a single continuous failure surface. In this manner, compaction, shear and tensile failures are represented, and consolidated for post-processing by means of a single damage variable. To verify computational predictions, the impact is recreated experimentally. A set of wood projectiles and RC slabs are fabricated, to allow for repeatable tests. Initial and boundary conditions are recreated by means of a steel bracket for the slab and an air cannon for the projectile. After initial calibration, a repeatable projectile speed, impact location and momentum transfer is achieved. The slabs are impacted repeatedly until macroscopic damage is clearly visible on the front and back faces of the slab. Damaged slabs are then cross-sectioned for material failures and plastic deformation. The simulations and experimental tests show consistency in predicting the progression of damage in RC slabs. In both cases, through-thickness failure was achieved in 2-4 impacts, depending on the initial kinetic energy of the projectile. Initial damage began as subsurface shear cracking, and in later impacts tensile failures, shear failure (plug formation) and compaction (pulverization) developed concurrently. Granted further verification is performed, there is a promising possibility that these methods and results could be used to provide safety ratings for structures designed to withstand multiple impacts, and to re-asses load ratings of damaged structures more accurately.

Degree

thesis:*
Name thesis:degree_name
Mechanical Engineering (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Mechanical Engineering (KGCOE)

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Parfilko, Yevgeniy
Contributors dc:contributor
  • Benjamin Varela

Subjects

dc:subject × 5

Identifiers

dc:identifier.*
Repository record dc:identifier
https://repository.rit.edu/theses/9435

Chain of custody

source
Harvested from
Rochester Institute of Technology
Base URL
repository.rit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Parfilko, Yevgeniy. Study of Damage Progression In CSCM Concretes Under Repeated Impacts. Thesis thesis, https://repository.rit.edu/theses/9435