Back to search

Rochester Institute of Technology

Ultra-Shallow Phosphorous Diffusion in Silicon using Molecular Monolayer Doping

Abstract

dc:description.abstract

Controlled doping of semiconductor material with high atomic accuracy and minimum defects in silicon is needed for next generation nanoscale and solar devices. The molecular monolayer doping (MLD) strategy is a novel technique based on the formation of self-assembled monolayer of dopant –containing molecule on surface of crystalline silicon, followed by rapid thermal annealing. MLD helps to form damage free junctions which are conformal. It is capable of nanometer scale control of dopant introduction and formation of ultra-shallow diffused profile. MLD can be used for conventional planar devices, FinFETs and nanowires, since both bottom-up and top-down approaches are feasible making it highly versatile. It also finds applications in solar cell industry, to fabricate selective emitters and increases the efficiency of the crystalline silicon solar cell along with reduced contact resistance. Phosphorus MLD on p-type silicon is formed using diethyl 1-propylphosphonate (DPP) as dopant source in this work. It involved demonstrating the formation of monolayer on silicon piece and 6-inch wafer. The setup is designed, assembled and implemented successfully to achieve monolayer formation on full wafer. The presence of phosphorous on the surface is detected by Auger electron spectroscopy and confirmed by X-ray photoelectron spectroscopy on the same silicon sample. The phosphorous monolayer on the surface is diffused in the silicon surface using rapid thermal anneal at 1000oC for 180 seconds. The diffusion profile is characterized by Secondary ion mass spectrometry (SIMS), spreading resistance profile and sheet resistance measurements. The result show successful creation of diffusion profile with high surface concentration, junction depth of 20 nm extracted at 1 x 1018 cm-3 base doping and sheet resistance is 920 Ω/sq. The total dose of phosphorous in the silicon is dependent on the number of bonds formed using DPP and dose is increased by multiple rounds of MLD and annealing, sheet resistance for double MLD is reduced to 670 Ω/sq. N+P junctions are fabricated using MLD and current-voltage characteristics are measured and analyzed using unified model. It is found that the specific contact resistivity of MLD doped wafer is lower than the implanted wafer. It is also reported that MLD doping can be masked by a thin oxide layer giving a possibility of patterned doping.

Degree

thesis:*
Name thesis:degree_name
Microelectronic Engineering (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Microelectronic Engineering (KGCOE)

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Tapriya, Astha
Contributors dc:contributor
  • Santosh K. Kurinec

Subjects

dc:subject × 4

Identifiers

dc:identifier.*
Repository record dc:identifier
https://repository.rit.edu/theses/9527

Chain of custody

source
Harvested from
Rochester Institute of Technology
Base URL
repository.rit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Tapriya, Astha. Ultra-Shallow Phosphorous Diffusion in Silicon using Molecular Monolayer Doping. Thesis thesis, https://repository.rit.edu/theses/9527