Back to search

Rochester Institute of Technology

Characterization and Modeling of a Plastic Film Transpired Solar Collector with and without Perforated Glazing

Abstract

dc:description.abstract

Transpired solar collectors are an economical and highly efficient option for applications involving the heating of ambient air. A transpired solar collector is a type of solar air heater in which outside air is continuously pulled through a perforated absorber plate and subsequently warmed. These collectors can be used for numerous applications, including crop drying, building ventilation, and desiccant regeneration. Transpired solar collectors have minimal moving parts, typically resulting in low maintenance and operation costs. In this study, absorber plates consisting of low-cost plastic sheets are characterized through outdoor testing and are fitted to a theoretical model. Different design configurations using plastic film sheets were tested at various solar fluxes (600, 800, and 1000 W/m^2) and suction velocities (0.005 to 0.045 m/s). One design configuration, comprised of 6 mil high-density polyethylene (HDPE) sheeting, achieved thermal efficiencies up to 66 ± 6 % with temperature rises as high as 28.4 ± 0.5 °C and useful heat gains per meter squared of collector area up to 576 ± 28 W/m^2. The same HDPE collector with an additional transpired glazing layer achieved efficiencies up to 79 ± 5 %, temperature rises of up to 46.8 ± 0.5 °C, and heat gains up to 746 ± 30 W/m^2. Existing studies have not evaluated the effect of a transpired glazing, especially glazing made from plastic sheets. The performance model was used in simulations to explore potential applications for this novel collector design.

Degree

thesis:*
Name thesis:degree_name
Sustainable Engineering (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Industrial and Systems Engineering (KGCOE)

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Mark, Brandon
Contributors dc:contributor
  • Rob Stevens

Subjects

dc:subject × 6

Identifiers

dc:identifier.*
Repository record dc:identifier
https://repository.rit.edu/theses/10246

Chain of custody

source
Harvested from
Rochester Institute of Technology
Base URL
repository.rit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Mark, Brandon. Characterization and Modeling of a Plastic Film Transpired Solar Collector with and without Perforated Glazing. Thesis thesis, https://repository.rit.edu/theses/10246