Back to search

Rochester Institute of Technology

Influence of Liquid Height on Pool Boiling Heat Transfer

Abstract

dc:description.abstract

As technology advances due to continuous research, devices are becoming more compact, efficient, and powerful. Therefore, heat rejection from such devices becomes ever so critical to maximizing their potential. Compared to other heat extraction methods, boiling provides one of the highest heat transfer coefficients. The heat extraction due to the boiling process is limited to the Critical Heat Flux (CHF). At CHF, an insulating layer of escaping bubbles forms upon the surface to prevent boiling continuity. Subsequently, the surface temperature increases uncontrollably, leading to a system failure. Hence, the elevation of CHF is critical to boiling enhancement. Improvements to the heat transfer process can be made with either surface manipulation or liquid manipulation. Based on previous studies, it is found that the removal of bubbles from the heater surface is critical to enhancing performance. Therefore, it is hypothesized that if a bubble can be encouraged to reach liquid-gas the interface quickly, gains in the boiling performance can be achieved. Due to the vapor bubble's movement in liquid bulk, it becomes critical to understand the influence of liquid height on pool boiling for enhancement. While pool boiling enhancement using heating surface modification is extensively studied and documented, there is a research gap between understanding the effect of liquid height at high heat fluxes. Thus, this study tries to evaluate the influence of liquid height on pool boiling performance at higher heat fluxes and identify the underlying bubble movement mechanism. It is observed that as CHF increases with liquid height. Moreover, it is observed that bubble movement is more effortless at low liquid height resulting in higher HTC. On the other hand, larger liquid height provides improved rewetting of the surface resulting in higher CHF. Upon analysis of high-speed recording of the escaping bubbles, it was observed that the maximum heat transfer coefficient is observed when the liquid height is about four times the height of the departing bubble diameter.

Degree

thesis:*
Name thesis:degree_name
Mechanical Engineering (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Mechanical Engineering (KGCOE)

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Shukla, Maharshi Y
Contributors dc:contributor
  • Satish Kandlikar

Subjects

dc:subject × 3

Identifiers

dc:identifier.*
Repository record dc:identifier
https://repository.rit.edu/theses/10649

Chain of custody

source
Harvested from
Rochester Institute of Technology
Base URL
repository.rit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Shukla, Maharshi Y. Influence of Liquid Height on Pool Boiling Heat Transfer. Thesis thesis, https://repository.rit.edu/theses/10649