Back to search

Rochester Institute of Technology

Air injection in a pseudo boiling system

Abstract

dc:description.abstract

The continuous development of microelectronic industry and miniaturization of microchips has led to a demand for large amount of heat removal from their surface. Conventional cooling systems are unable to extract such large amount of heat and thus necessitating efficient thermal management. Pool Boiling provides a highly efficient way to remove high heat at low wall superheats. Enhancement of heat transfer by pool boiling will result in reduced size and better efficiency of the device. The current research work focuses on the application of enhanced heat removal technique by macro-convection mechanism using an air injection system. Air injection through the heated wall is hypothesized to provide significant heat transfer enhancement like the convective component in pool boiling. The stirring action of bubbles is expected to provide heat transfer enhancement by corresponding transient conduction and microconvection mechanisms. Experiments are conducted in a pool of water at atmospheric pressure with air injected through multiple nozzles over a superficial velocity range of 0.04 to 0.15 m/s over a 10 mm square heated copper surface. The latent heat transfer component is kept low to reduce evaporation of water in the air stream by lowering the bulk temperature. Heat transfer coefficients in the range 6.8 -13 kW/m2 °C were obtained with a superficial air velocity of 0.04-0.15 m/s. Using a jet impingement model for the returning liquid to the heater surface, the theoretical estimated heat transfer coefficients are found to be within 30% of the experimental values. The results from this work can be used for enhancing single-phase liquid cooling of high-powered electronic devices as well as other practical systems.

Degree

thesis:*
Name thesis:degree_name
Mechanical Engineering (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Mechanical Engineering (KGCOE)

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Das, Saikat
Contributors dc:contributor
  • Satish Kandlikar

Subjects

dc:subject × 1

Identifiers

dc:identifier.*
Repository record dc:identifier
https://repository.rit.edu/theses/10870

Chain of custody

source
Harvested from
Rochester Institute of Technology
Base URL
repository.rit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Das, Saikat. Air injection in a pseudo boiling system. Thesis thesis, https://repository.rit.edu/theses/10870