Back to search

Rochester Institute of Technology

Study of the wear of dental composites using an atomic force microscope

Abstract

dc:description.abstract

This work presents a study of the wear of four dental composites (Concept, XRV, Maxxim, and Belleglass) which are in commercial use. The wear testing was performed using an Atomic Force Microscope (AFM). Several scanning techniques and various cantilevers were attempted. Finally use of a stainless steel cantilever with a tungsten bead attached resulted in quantifiable wear. AFM imaging in contact mode was used for evaluation of the wear tests. Wear rates are reported as volume per 100,000 scans. The AFM measured wear rates rank the tested composites from most to least wear as follows: Concept highest volume of wear XRV Maxxim BelleGlass least volume of wear. Micro-hardness measurements were also conducted.

Degree

thesis:*
Name thesis:degree_name
Materials Science and Engineering (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Center for Materials Science and Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Ewbank, Dale E.
Contributors dc:contributor
  • Scanlon, M.

Subjects

dc:subject × 1

Identifiers

dc:identifier.*
Repository record dc:identifier
https://repository.rit.edu/theses/2779

Chain of custody

source
Harvested from
Rochester Institute of Technology
Base URL
repository.rit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Ewbank, Dale E.. Study of the wear of dental composites using an atomic force microscope. Thesis thesis, https://repository.rit.edu/theses/2779