Back to search

Rochester Institute of Technology

Development of a technique to measure the MTF of a transducer used in an ultrasonic fingerprint scanner

Abstract

dc:description.abstract

Beam characteristics of a transducer play a major role in defining the resolution of any ultrasound imaging system. Direct experimental estimation of the beam profile is often desirable, however, one has to carefully correct for effects that are attributed to the measurement process itself. We report here our experience of using a measurement technique developed for circular disk focused transducers. When the anticipated beam size is much smaller than 0.5 mm the use of a hydrophone to scan the monochromatic beam is not adequate. A more suitable approach is to make a measurement in pulse-echo mode using a thin (125 micron or less) wire target. In this case, a short pulse excitation is used from which the monochromatic information is derived via Fourier transform. However, two measurement artifacts need to be corrected. Multiple reflections due to the finite wire size show up as periodic spikes in the spectrum. These were corrected for using Cepstrum domain filtering method. Second, the wire target measurement essentially represents a one-dimensional projection of the two-dimensional beam pattern in a plane perpendicular to the beam axis. Smoothing effects were investigated by comparing experimental results and theoretical predictions based on Lommel diffraction formulation. The apodization of the transducer to remove the side-lobes would have also caused an increase in width of the main lobe. Line Spread Function and Modulation Transfer Function, with respect to frequency and distance from the target to the transducer, were characterized and reported.

Degree

thesis:*
Name thesis:degree_name
Imaging Science (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Chester F. Carlson Center for Imaging Science (COS)

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Blair, Laura
Contributors dc:contributor
  • Navalgund Rao

Identifiers

dc:identifier.*
Repository record dc:identifier
https://repository.rit.edu/theses/7044

Chain of custody

source
Harvested from
Rochester Institute of Technology
Base URL
repository.rit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Blair, Laura. Development of a technique to measure the MTF of a transducer used in an ultrasonic fingerprint scanner. Thesis thesis, https://repository.rit.edu/theses/7044