Back to search

Rochester Institute of Technology

Modeling periodic blade stresses due to stator-rotor interactions using computational fluid dynamics

Abstract

dc:description.abstract

High cycle fatigue (HCF) is a common problem in military turbofan engines, resulting in engine component failure, and billions of dollars a year in repair and maintenance. HCF occurs due to engine component aerodynamic interactions, including vortical and potential field effects. In 1987, the IHPTET program was created by the U.S. Department of Defense. One of the goals of this program was to reduce high cycle fatigue in engine components. A method of reducing the amount of HCF occurring in a turbofan engine is referred to as trailing edge blowing (TEB). TEB reduces the vortical, or wake, components of a fluid flow that propagate from upstream stator blades, to impinge on the surfaces of downstream rotor blades, one of the causes of HCF. The experimental results from the study of an F109 turbofan engine showed that TEB did reduce the amount of HCF related stress on the rotor blades; however, the amount of TEB used compromised the overall efficiency of the compressor by too high an amount. Thus, it is necessary to find an optimal level of TEB to achieve reduction in HCF forces, while maintaining high compressor efficiency. Due to the absence of an engine test stand for experimental testing, the solution was simulated using computational fluid dynamics (CFD). The current investigation focuses on the necessary preliminary steps taken in optimizing TEB, using CFD. TEB was not simulated, however the following investigation paves the way for future CFD work, including a method of incorporating TEB into a CFD simulation. The work also outlines the mistakes made, so that they are not made again by future researchers, as well as the recommended methods of modeling the F109 stator-rotor system using CFD. To the knowledge of the current investigator, using CFD to model rotor blade surface pressures in the F109 turbofan engine, due to the presence of upstream stators, has not previously been attempted.

Degree

thesis:*
Name thesis:degree_name
Mechanical Engineering (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Mechanical Engineering (KGCOE)

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Barrett, Lisa M.
Contributors dc:contributor
  • Elizabeth DeBartolo

Identifiers

dc:identifier.*
Repository record dc:identifier
https://repository.rit.edu/theses/7080

Chain of custody

source
Harvested from
Rochester Institute of Technology
Base URL
repository.rit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Barrett, Lisa M.. Modeling periodic blade stresses due to stator-rotor interactions using computational fluid dynamics. Thesis thesis, https://repository.rit.edu/theses/7080