Back to search

Rochester Institute of Technology

Modification of a longitudinal load cell balance and an experimental study of winglet effects on stall for application to Micro Air Vehicles

Abstract

dc:description.abstract

Interest in Micro Air Vehicles (MAVs) has increased in recent years. The ability of small craft to fly covert surveillance missions or carry some other sensory payload while providing real-time information has sparked the growth of research in the field. The Rochester Institute of Technology has the capacity to facilitate MAV research. RIT's subsonic wind tunnel is capable of obtaining the low-speed flow to obtain the testing Reynolds numbers of 75,000 to 200,000. This research focused on the repair work of the longitudinal piezoelectric load cell balance. The balance had not been maintained properly and needed many repairs. Once modifications to the balance were completed, numerous validation checks were conducted. Validation tests for static data included a flat plate and the Eppler-212 airfoil. Validation tests for dynamic data included the LRN1007 airfoil. Multiple tests were conducted to check the repeatability of data. After the functionality of the balance had been validated, a preliminary investigation into the effects of winglet span and chord length was conducted. Winglets have been shown to increase the lift performance of MAVs, but their effect on stall had not been investigated. A modified inverse Zimmerman planform was used for winglet testing. Planform airfoils tested included a flat plate, the GOE417a, and the S5020. The tested Reynolds numbers were 75,000, 100,000, and 125,000. The results show that winglet A, which covered the entire wingtip and had a three centimeter span, had the highest lift and drag compared to the other winglet and no winglet configurations. Winglet A also consistently stalled before the other configurations. Tests also showed that the stall angle generally increased as the winglet chord length decreased. Winglet A is not recommended for MAV use due to lower stall angle and higher drag characteristics.

Degree

thesis:*
Name thesis:degree_name
Mechanical Engineering (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Mechanical Engineering (KGCOE)

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Grilly, Aaron J.
Contributors dc:contributor
  • Jeffery Kozak

Identifiers

dc:identifier.*
Repository record dc:identifier
https://repository.rit.edu/theses/8043

Chain of custody

source
Harvested from
Rochester Institute of Technology
Base URL
repository.rit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Grilly, Aaron J.. Modification of a longitudinal load cell balance and an experimental study of winglet effects on stall for application to Micro Air Vehicles. Thesis thesis, https://repository.rit.edu/theses/8043