Back to search

Rochester Institute of Technology

Evaluation of a Dual Chamber Vortex Generator for a lithium bromide-water absorption refrigeration system

Abstract

dc:description.abstract

Absorption refrigeration systems are widely accepted as a means of utilizing waste heat from industrial processes to provide cooling to buildings. In many cases waste heat is in the temperature range from 60°C to 90°C. At these relatively low temperatures, conventional absorption refrigeration systems operate at a low coefficient of performance (COP) rendering them economically infeasible. A new concept, the Dual Chamber Vortex Generator (DCVG) has been designed to replace the conventional generator in a lithium bromide-water absorption refrigeration system. The conceptual basis of the DCVG is that a vortical flow would be established inside the DCVG creating a high speed, low pressure region that would augment the separation of refrigerant from the absorbent. The motivation of the DCVG is to improve the COP and allow for absorption refrigeration systems to be an economically feasible means of utilizing waste heat in the 60°C to 90°C temperature range. Environmental benefits would also be realized by using waste heat instead of consuming additional energy resources. A previously built DCVG was tested on a modified pre-existing test stand. Sixteen experimental trials were conducted in the Applied Fluids Laboratory at Rochester Institute of Technology to assess the DCVG's performance with varying inlet temperatures and varying inlet flow rates to the DCVG. Visual observations as well as temperature, pressure, and flow rate measurements were recorded at various points on the test stand to analyze the DCVG's performance. Results of this study indicate that high levels of uncertainty cause the collected data to be inconclusive in terms of determining the benefits of the DCVG compared to a conventional generator. A method of comparing the DCVG to a conventional generator is necessary as well. Also, during the experimental trials, a stable vortical flow could not be established in the DCVG. An extensive list of detailed recommendations is provided to direct this project toward its goal of determining whether or not a DCVG is beneficial to an absorption system.

Degree

thesis:*
Name thesis:degree_name
Mechanical Engineering (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Mechanical Engineering (KGCOE)

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Skolnik, Lee
Contributors dc:contributor
  • Ali Ogut

Identifiers

dc:identifier.*
Repository record dc:identifier
https://repository.rit.edu/theses/8040

Chain of custody

source
Harvested from
Rochester Institute of Technology
Base URL
repository.rit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Skolnik, Lee. Evaluation of a Dual Chamber Vortex Generator for a lithium bromide-water absorption refrigeration system. Thesis thesis, https://repository.rit.edu/theses/8040