Back to search

Rochester Institute of Technology

UV and VUV Photo-Oxidation of Fluoropolymer and Carbon Nanotube Surfaces

Abstract

dc:description.abstract

Three surface modification techniques: (1) atmospheric oxygen pressure using low-pressure Hg lamps, (2) low oxygen pressure with emission downstream from an Ar microwave plasma, and (3) high pressures of He in a rotating D.C. arc, that was designed to produce a spectral continuum from He excimers ( λ = 58 - 110 nm), were employed to photo-oxidize multiwalled carbon nanotube (MWNT) powder [1], single walled carbon nanotube (SWNT) paper [2], Teflon® polyfluorinated ethylene-propylene (FEP) [3] and Teflon® poly(tetrafluoroethylene-co-perfluropropyl vinyl ether) (PFA) [4]. Results from X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, FT-IR, Scanning Electron Microscopy (SEM) and Contact angle measurements of the oxidized surfaces are presented. Copper, that was sputter-coated onto the modified FEP and PFA, showed adhesion failure occurring within the modified materials (cohesive failure) and not at the Cu-FEP and -PFA interfaces. [1] B. Parekh, T. Debies, P. Knight, K. S. V. Santhanam and G. A. Takacs, "Photo-oxidation of Multi walled Carbon Nanotubes", six page manuscript accepted for publication in: Proceedings of Fall 2005 National Meeting of the Materials Research Society; Symposium Q Degradation Processes in Nanostructured Materials, Boston MA (2006). [2] B. Parekh, T. Debies, C. M. Evans, B. J. Landi, R. P. Raffaelle and G. A. Takacs, "Photo-oxidation of Single walled Carbon Nanotubes", six page manuscript accepted for publication in: Proceedings of Fall 2005 National Meeting of the Materials Research Society; Symposium Q Degradation Processes in Nanostructured Materials, Boston MA (2006). 11 [3] B. Parekh, A. Entenberg, T. Debies, and G. A. Takacs, "Cohesive Failure of Sputtered Copper to Teflon^FEP Interface Modified with VUV Helium Excimer Radiation", presented at the Second International Symposium on Adhesion Aspects of Thin Films, Savannah, GA, Nov. 9-11, 2005. [4] B. Parekh, A. Entenberg, T. Debies, and G. A. Takacs, "Interfacial Adhesion Improvement of Sputtered Cu to TeflonPFA Modified by VUV Helium Excimer Radiation", presented at the Rochester Section of American Chemical Society (ACS) in Rochester, NY, Sept. 29 - 30, 2005.

Degree

thesis:*
Name thesis:degree_name
Materials Science and Engineering (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Center for Materials Science and Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Parekh, Bhavin
Contributors dc:contributor
  • Gerald Takacs

Identifiers

dc:identifier.*
Repository record dc:identifier
https://repository.rit.edu/theses/8034

Chain of custody

source
Harvested from
Rochester Institute of Technology
Base URL
repository.rit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Parekh, Bhavin. UV and VUV Photo-Oxidation of Fluoropolymer and Carbon Nanotube Surfaces. Thesis thesis, https://repository.rit.edu/theses/8034