Rochester Institute of Technology
Electrical characterization and application of pulsed DC magnetron sputtered zirconium oxide
Abstract
dc:description.abstractAs aggressive scaling of CMOS circuits continues, gate oxide thickness is reduced in order to maintain control of ever shrinking channel lengths. Current cutting edge transistors are using a gate oxide thickness below 20Å, approaching a regime where direct, or quantum, tunneling is the primary leakage mechanism. Below ~16Å, leakage becomes too great for use in MOS transistors. There are short-term fixes in place, however the industry road map indicates the need for an alternative to SiO2 within five years. Among the leading candidates is Zirconium Oxide (ZrO2). ZrO2 was investigated as a possible replacement for Si02 in MOS devices. A statistically designed experiment was utilized to optimize processing parameters. MOS capacitors were used as a test vehicle. Leakage less than 200pA, breakdown strength greater than 8MV/cm, and relative permittivity greater than 7, have been demonstrated. ZrO2 gate dielectric, PMOS transistors have been fabricated with l-V characteristics comparable to transistors with a SiO2 gate dielectric, as shown in the l-V plot below. An initial investigation into a damascene Copper/Titanium gate stack, utilizing ZrO2 as a gate dielectric, was also been performed. Capacitors fabricated in this manner exhibited similar reliability results as capacitors fabricated using conventional processes. Graph: lDS vs. VDS at different VGS, for a PMOS transistor with a ZrO2 gate dielectric. Graph is difficult to read.
Degree
thesis:*- Name thesis:degree_name
- Microelectronic Engineering (MS)
- Level thesis:degree_level
- Thesis
- Discipline thesis:degree_discipline
- Microelectronic Engineering (KGCOE)
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Leathem, Michael R.
- Contributors dc:contributor
-
- Michael A. Jackson
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://repository.rit.edu/theses/8027