Rochester Institute of Technology
Low Frequency Noise Modeling in Single- and Double-Gate MOSFETs
Abstract
dc:description.abstractThe Flicker or 1// noise dominates the noise spectrum at low frequency. A serious concern for MOSFETs for circuit application is much higher flicker (1//) noise because of the heterogeneous interface between silicon (Si) and silicon dioxide (Si02). Very high intrinsic flicker noise of CMOS transistors becomes a drawback for low-Intermediate Frequency (IF) or direct-conversion architectures. In spite of extensive research and efforts to understand the low-frequency noise origin in semiconductor devices, there exists no unique theory to explain the low-frequency noise generation mechanism. Flicker noise in MOSFETs is usually perceived to be caused by carrier density fluctuations, which is result of interaction of free carriers with oxide traps via interface states. The most widely accepted theories to explain the flicker noise generation mechanism in MOSFETs are the number fluctuation model proposed by McWhorter based on the tunneling transitions between traps in the oxide and channel carriers, and the mobility fluctuation model, which is described by Hooge's empirical relation. Correlated low frequency noise models, which incorporate both the number fluctuation and correlated surface mobility fluctuation, have also been studied. This work presents a physics-based, analytical model for low-frequency or 1// noise in single- and double-gate MOSFETs. The model is an extension of a correlated low frequency noise model. The developed model takes into account the effects of quantization in the silicon channel, short channel characteristics of the device, and effective trap levels contributing to lowfrequency noise generation mechanism. The inclusion of quantum effects is based on a self-consistent solution of Poisson and Schrbdinger equations in the silicon inversion layer. For low-frequency noise calculation, both the number induced and correlated mobility-induced perturbations caused by the channel carriers' interactions with the oxide states are considered. The physical parameter, effective oxide trap levels at the semiconductor-insulator interface, is modeled using the Hooge parameter and is correlated with inversion charge of the device. The model has been used to predict the low-frequency noise characteristics of a single-gate (bulk) device, a single-gate (SOI) device and a double-gate (SOI) device.
Degree
thesis:*- Name thesis:degree_name
- Electrical Engineering (MS)
- Level thesis:degree_level
- Thesis
- Discipline thesis:degree_discipline
- Electrical Engineering (KGCOE)
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Rai, Shailesh S.
- Contributors dc:contributor
-
- Syed S. Islam
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://repository.rit.edu/theses/8131