Back to search

Rochester Institute of Technology

Pool Boiling Heat Transfer Surface Enhancement using Electrodeposition with Non-Electrolyte Bath

Abstract

dc:description.abstract

The use of pool boiling for heat transfer cooling has been widely researched and implemented. A number of different modes of enhancement currently exist that improve the heat transfer properties of a boiling surface. Electrochemical deposition is a simple method that can be used to alter the chemical and geometrical composition of a surface, these alterations can be used to enhance the surface’s heat transfer properties with relative ease. It also provides the ability to deposit coatings onto a substrate that may be of different composition and morphology. This study sought to develop a simple electrochemical deposition process for depositing graphite/graphene composites onto a copper (Cu) substrate. Copper chips were machined in-house and used as the working electrode in the electrochemical deposition. The deposited chips were studied to determine the effects that the deposition had on the surface’s boiling heat transfer properties. Different electrochemical bath solutions, current densities, and deposition times were studied. Scanning Electron Microscope (SEM) images, Raman spectra, and contact angle measurements were collected to help characterize the enhanced surfaces. These surfaces were subjected to pool boiling under atmospheric conditions using distilled water as a working fluid. Chips were mounted into the pool boiling experimental set-up and were heated at 5 V increments until critical heat flux (CHF) was reached. The temperature at three points along the heated surface was recorded as well as the power input. Heat flux (q″), heat transfer coefficient (h), wall superheat (ΔTsat), and CHF enhancement were calculated. A maximum critical heat flux enhancement factor of 1.96 was observed. The largest heat transfer coefficient enhancement factor was 2.95.

Degree

thesis:*
Name thesis:degree_name
Mechanical Engineering (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Mechanical Engineering (KGCOE)

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Mejia, Valentina
Contributors dc:contributor
  • Satish G. Kandlikar

Subjects

dc:subject × 3

Identifiers

dc:identifier.*
Repository record dc:identifier
https://repository.rit.edu/theses/8632

Chain of custody

source
Harvested from
Rochester Institute of Technology
Base URL
repository.rit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Mejia, Valentina. Pool Boiling Heat Transfer Surface Enhancement using Electrodeposition with Non-Electrolyte Bath. Thesis thesis, https://repository.rit.edu/theses/8632