Back to search

Rochester Institute of Technology

Investigation and Characterization of Conductive DEAP Polymer Materials with Nickel Nanocomposites

Abstract

dc:description.abstract

Dielectric ElectroActive Polymers, or DEAPs, are devices with coupled electrical and mechanical responses that resemble stretchable parallel plate capacitors, that can act as actuators, sensors, or electrical generators. Currently, the electrode layers on the top and bottom are generally conductive carbon grease, which is dirty and also causes curing issues for certain polymers. This thesis explores several polymers and conductive fillers to identify a conductive nanocomposite material, to replace the grease electrode with a solid material and eliminate issues associated with grease electrodes. It then characterizes the mechanical and electric properties and how they change during cyclic loading, while augmenting an equibiaxial tensile testing machine and advancing the knowledge of equibiaxial characterization. The most promising polymer/filler combination was found to be EcoFlex30, a platinum cure silicone rubber, containing seven volume percent of nickel nanostrands and three volume percent of 0.1 mm length nickel-coated carbon fiber. Using two conductive fillers of different sizes resulted in much higher conductivity than a single filler alone, and an enormous piezoresistive effect. This material gave weak conductivity at no load, increasing several orders of magnitude as strained and well surpassing the benchmark of 1.2 S/m set by conductive carbon grease. Elastomer materials were found to have conductivities as high as 275 S/m under peak strain, and changing the nickel-coated carbon fiber length allowed for strains over 120%. Equibiaxial stress-strain curves were also analyzed for energy lost through hysteresis, in order to compare to published results for DEAPs used as Dielectric Energy Generators. Results and recommendations are presented for using and further improving the materials for applications of DEAPs used as energy harvesters and capacitive sensors, using the material alone as a piezoresistive sensor, and improving the equibiaxial characterization process.

Degree

thesis:*
Name thesis:degree_name
Mechanical Engineering (MS)
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Mechanical Engineering (KGCOE)

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Wrisley, Seaver
Contributors dc:contributor
  • Elizabeth DeBartolo

Subjects

dc:subject × 6

Identifiers

dc:identifier.*
Repository record dc:identifier
https://repository.rit.edu/theses/8794

Chain of custody

source
Harvested from
Rochester Institute of Technology
Base URL
repository.rit.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Wrisley, Seaver. Investigation and Characterization of Conductive DEAP Polymer Materials with Nickel Nanocomposites. Thesis thesis, https://repository.rit.edu/theses/8794