Abstract
dc:description.abstractPerovskite solar cells present the possibility for less expensive electricity generation, through the use of low cost materials and fabrication methods relative to current silicon-based technology. Many current methods of fabricating thin film perovskite solar cells focus on spin-coating, which inherently lacks scalability due to particle conglomeration, poor uniformity over a larger area, and safety concerns. Dip-coating, an alternative to spin-coating, which is explored here addresses these issues which limit scalability. Each individual layer can be separately synthesized, deposited, and characterized, which leads towards scalability. Choosing only the best results from each independent layer allowed progress to the creation of a sandwich style perovskite cell fabricated through dip coating. By using a quartz crystal microbalance, the thicknesses of these uniform films has been determined to be in the desired range of under one micron. Currently, there is a photo response present, with a maximum produced voltage of 500 mV. The methods presented here create an initial starting point for the large scale manufacturing of dip coated perovskite solar cells.
Degree
thesis:*- Name thesis:degree_name
- MS Mechanical Engineering
- Level thesis:degree_level
- Thesis
- Discipline thesis:degree_discipline
- Mechanical Engineering
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Iannello, Joseph F.
- Contributors dc:contributor
-
- Xue, Wei
- Ramanujachary, Kandalam
- Hettinger, Jeffrey
Subjects
dc:subject × 9Identifiers
dc:identifier.*- Repository record dc:identifier
- https://rdw.rowan.edu/etd/2569