Back to search

Rowan University

Hybrid monomers & resins for high-performance thermosetting polymers, thermoplastics, & additive manufacturing

Abstract

dc:description.abstract

Vinyl ester and epoxy resins are used to produce thermosetting polymeric materials for a variety of commercial and military applications due to their relatively high moduli (2-3 GPa at 25 deg C), glass transition temperatures (Tgs) (greater than or equal to 120 deg C), and adequate fracture toughness (G1C approx. 200-250 J m-2). Most commercially available vinyl ester and epoxy resins are typically cured via traditional manufacturing techniques such as resin transfer molding and thermal curing. However, additive manufacturing (AM) has gained significant traction as a favorable manufacturing technique over traditional methods due to the ability to create customizable parts with complex geometries on-demand. This work aims to design high-performance materials that display similar thermal properties to conventional vinyl ester and epoxy resins while achieving significant gains in polymer fracture toughness and, in some cases, enable the use of such materials in stereolithography, an AM technique. Studies of the structure-property relationships of prepared, bio-based materials demonstrate that, in general, there are significant tradeoffs between Tg and fracture toughness; therefore, desired properties are not achieved. However, manipulation of polymer network connectivity via sequential formation of interpenetrating polymers allows for not only the use of AM, but also yields polymeric materials with Tgs that exceed 120 deg C and fracture toughness values four to five times higher in magnitude than conventional vinyl ester and epoxy resins.

Degree

thesis:*
Name thesis:degree_name
PhD Engineering
Level thesis:degree_level
Dissertation
Discipline thesis:degree_discipline
Chemical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Bassett, Alexander William
Contributors dc:contributor
  • Stanzione, Joseph F.
  • LaScala, John J.
  • Banning, Joseph E.

Subjects

dc:subject × 5

Identifiers

dc:identifier.*
Repository record dc:identifier
https://rdw.rowan.edu/etd/2765

Chain of custody

source
Harvested from
Rowan University
Base URL
rdw.rowan.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Bassett, Alexander William. Hybrid monomers & resins for high-performance thermosetting polymers, thermoplastics, & additive manufacturing. Dissertation thesis, https://rdw.rowan.edu/etd/2765