Back to search

Rowan University

DESIGN OF A CUSTOM DIGITAL LIGHT PROJECTION PRINTER FOR IN-SITU PRODUCTION OF COMPOSITES WITH IMPROVED THERMOMECHANICAL PROPERTIES

Abstract

dc:description.abstract

This work seeks to improve upon the existing state-of-the-art for vat photopolymerization additive manufacturing; namely, producing in-situ composites that combine the precision and high-performance materials of the vat photopolymerization with the strength of fiber-reinforced polymer composites. A custom-designed digital light projection printer was designed and built for printing composites, which includes an automated fiber tape system to place woven E-glass fiber mats in-situ. To validate the performance improvement of composites versus the neat matrix, composites were fabricated on the custom printer with hand-placed fiber mats. A high-performance, dual-cure resin was used for these studies. The effect of layer height on matrix properties was evaluated, and there was no statistically significant difference in glass transition temperature (Tg) or glassy storage modulus (E') at 25°C as a function of layer height. It was found that composites exhibited up to a 25% improvement in E' relative to the matrix (2.9 versus 3.7 GPa) at a fiber volume fraction of 4-6% and a layer height of 200 micro-m. All composites exhibited a slightly lower Tg relative to the matrix (105 versus 115°C), but there is a minimal loss of thermal properties in the composites and a modest improvement in storage modulus, even with low fiber fraction. These results suggest that parts produced with the custom printer have the potential for high-strength military applications.

Degree

thesis:*
Name thesis:degree_name
M.S. Chemical Engineering
Level thesis:degree_level
Thesis
Discipline thesis:degree_discipline
Chemical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Gillan, Margaret Anne
Contributors dc:contributor
  • Joseph F. Stanzione III, Ph.D.
  • Nicholas J. Alvarez, Ph.D.
  • Francis (Mac) Haas, Ph.D.

Subjects

dc:subject × 7

Identifiers

dc:identifier.*
Repository record dc:identifier
https://rdw.rowan.edu/etd/2945

Chain of custody

source
Harvested from
Rowan University
Base URL
rdw.rowan.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Gillan, Margaret Anne. DESIGN OF A CUSTOM DIGITAL LIGHT PROJECTION PRINTER FOR IN-SITU PRODUCTION OF COMPOSITES WITH IMPROVED THERMOMECHANICAL PROPERTIES. Thesis thesis, https://rdw.rowan.edu/etd/2945