Back to search

University of Saskatchewan

DESIGNING SINTER RESISTANT MONOMETALLIC AND BIMETALLIC NANOMATERIALS FOR CATALYSIS

Abstract

dc:description.abstract

A major concern associated with the use of noble metal nanoparticles and clusters for catalysis is stability. Stabilizing ligands are used to prevent the agglomeration of nanoparticles synthesized under ambient conditions. However, these ligands may block the active sites on the metal surface. Typically, high-temperature heat treatment (550 ºC-650 ºC) is required for the complete removal of ligands from catalysts, which leads to the sintering of particles to form larger particles. Sintering occurs during heat treatment processes because of the increased mobility of the nanomaterials and can lead to catalyst deactivation as the surface area of the catalytic nanoparticles decreases. Many studies have focused on improving the thermal stability of nanoparticle catalysts by protecting them with metal oxide shells. However, protective shells can also make it harder for substrates to diffuse to the surface and react, thus creating mass-transfer issues. The main focus of this thesis is synthesizing sinter-resistant metallic and bimetallic catalysts. In Chapter 1, a detailed description of activation processes and methods for enhancing the thermal stability of nanomaterials are provided. Chapter 2 details how a protective silica shell with a thickness of 40 nm enhances the thermal stability of Au25(MUA)18 clusters (MUA=mercaptoundecanoic acid). The morphology of the resulting Au catalysts before and after calcination at temperatures up to 650 ºC was analyzed by TEM and Extended X-ray Absorption Fine Structure Spectroscopy (EXAFS) analyses, which showed that the Au catalysts are much more stable to sintering compared to un-encapsulated clusters. However, mass transfer issues associated with the silica shell were also observed. Chapter 3 shows that Atomic Layer Deposition can be an effective method to control the shell thickness of alumina overlayers using Au25(MUA)18 and Au25(DDT)18 (DDT=dodecanethiol) clusters. TEM and EXAFS analysis were used to study the structural changes before and after thermal treatment. 20 cycles of alumina coating are required to improve the thermal stability of Au catalysts made from Au25(MUA)18 clusters. In Chapter 4, the sintering behavior of Au25(MPTS)18 (MPTS=3-mercaptopropyl)trimethoxysilane) clusters on mesoporous silica supports under oxygen atmosphere (1 Pa) was studied by an in situ TEM technique. Particle migration and coalescence was found to be the more dominant mechanism for the sintering of monodisperse Au25(MPTS)18 clusters on the mesoporous silica support. In situ TEM studies showed that the mobility of the particles increases as the calcination temperature increases. Further TEOS treatment helped to reduce the mobility of Au nanoparticles by forming silica overcoats and the resulting materials showed excellent sinter-resistance up to 550 ˚C. The stability of TEOS treated Au25(MPTS)18/mesoporous silica catalysts were also confirmed by EXAFS analysis. In Chapter 5, the galvanic replacement reaction was employed for synthesizing bimetallic catalysts from silica encapsulated Ag nanoparticles. During the activation process at 650 ºC, Ag nanoparticles were fragmented into smaller particles with an average size of 2.2 ± 1.0 nm and well dispersed in a silica matrix. These activated Ag clusters were then used as a sacrificial template for galvanic replacement reactions using Pd salts. Liquid cell in situ X-ray absorption analysis was utilized to monitor the galvanic replacement reaction of Ag@silica with Pd precursors. Finally, Chapter 6 focuses on the synthesis of the encapsulation of atom-precise Pd clusters in silica for use as catalysts for methane combustion reactions. Catalytic activity studies for methane combustion reactions using encapsulated and non-encapsulated Pd clusters show that encapsulated clusters were much more active for methane oxidation than their non-encapsulated counterparts.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy (Ph.D.)
Level thesis:degree_level
Doctoral
Discipline thesis:degree_discipline
Chemistry
Department thesis:degree_department
Chemistry
Grantor
University of Saskatchewan
Year dc:date.issued
2020

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Veeranmaril, Sudheesh Kumar
Advisor dc:contributor.advisor
  • Scott, Robert W. J
Committee members dc:contributor.committeemember
  • Pickering, Ingrid
  • Soltan, Jafar
  • Urquhart, Stephen
  • Grosvenor, Andrew

Subjects

dc:subject × 4

Identifiers

dc:identifier.*
Handle dc:identifier.uri
https://hdl.handle.net/10388/12902

Chain of custody

source
Harvested from
University of Saskatchewan
Base URL
harvest.usask.ca/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Veeranmaril, Sudheesh Kumar. DESIGNING SINTER RESISTANT MONOMETALLIC AND BIMETALLIC NANOMATERIALS FOR CATALYSIS. Doctoral thesis, University of Saskatchewan, 2020. https://hdl.handle.net/10388/12902