Back to search

University of Saskatchewan

Postharvest processing of cannabis (Cannabis sativa) and valorization of its stalks

Abstract

dc:description.abstract

The legalization of cannabis in Canada has facilitated the growth of its processing industry. Postharvest drying is a critical determinant of the cannabis product quality. Traditional drying methods, involving slow and manual hanging of cannabis inflorescences in controlled environments, are time-intensive and vulnerable to microbial contamination. This study explores advanced drying methods to improve efficiency and quality, compares their environmental impacts through life cycle assessment, and investigates the use of cannabis stalks for producing bio-based materials. The research is divided into five phases, covering drying optimization, quality evaluation, sustainability analysis, and waste valorization. In phase one of this study, an advanced and rapid drying technique was applied to cannabis inflorescences using a combined microwave-infrared (MI) heating system. Drying at three microwave (MW) power levels (0, 70, 140 W) with or without 70 W infrared (IR) was performed and compared with conventional controlled environmental drying (CED) at 30 °C and 60% RH. MI drying reduced drying time from 840 min to 16-200 min based on the MI power level, improved moisture diffusivity, and lowered energy consumption. It enhanced decarboxylation, increasing tetrahydrocannabinol (THC) from 6.31% to 16.65% and reducing tetrahydrocannabinolic acid (THCA). Although terpene retention was significantly lower than CED, MI drying offers a faster, energy-efficient option suitable for medicinal and edible cannabis products. To address quality loss from rapid drying, phase two explored MI heating as a short-duration pretreatment (1-5 min, 70-210 W MW, 75-225 W IR), followed by conventional drying at 25 °C and 50% RH. With the increasing of MI power and time, the drying rate and THC content were increased, while reducing THCA and energy use. Optimal conditions (210 W MW, 225 W IR, 3.36 min) achieved >65% energy savings, lower equilibrium moisture content, and a 43% terpene reduction. Artificial neural network (ANN) modeling outperformed response surface methodology (RSM) in predicting response variables. While MI pretreatment enhanced drying efficiency, terpene preservation remains a challenge. The next phase explored cold plasma (CP) pretreatment of cannabis inflorescences at 300-400 W for 20-40 s. CP-pretreated samples reached lower equilibrium moisture content (10-14%) in 690-840 min, compared to 16% in 1260 min for untreated samples. CP improved moisture diffusivity, reduced energy consumption, and enhanced decarboxylation- increasing THC levels while lowering THCA, with total THC remaining stable (25.82–28.36% vs. 27.45%). Notably, CP at 400 W for 30 s preserved around 96% of total terpene content. These results highlight CP as a promising pretreatment for reducing drying time and preserving key quality attributes, especially terpenes, in cannabis processing. A life cycle assessment (LCA) using IMPACT 2002+ was conducted to compare environmental impacts of conventional drying (CED) with MI-pretreated drying (MI-CED) and CP- pretreated drying (CP-CED) methods. Both MI-CED and CP-CED significantly reduced environmental burdens, with CP-CED cutting impacts by ~50% and MI-CED by ~72% during drying. Global warming potential from greenhouse gas emissions dropped from 11.31 kg CO₂ eq. (CED) to 5.68 kg (CP-CED) and 3.25 kg (MI-CED). These results highlight the sustainability benefits of integrating advanced pretreatment technologies in cannabis drying. In the last phase of this study, cannabis stalks were characterized and valorized into cellulose nanocrystals (CNCs) through alkali treatment, bleaching, and metal-salt oxidation. The stalks contained 57% cellulose and 0.078% THC, which decreased to 0.036% following mild NaOH (2%) pretreatment, demonstrating their suitability for conversion into biobased materials without regulatory constraints. The resulting CNCs exhibited a spindle-shaped morphology (280 nm in length and 9 nm in width) and a crystallinity of 72%, indicating their potential applications in bio-composites, adhesives, absorbents, coatings, and packaging materials. Overall, this thesis demonstrates that emerging drying strategies, particularly short-time CP pretreatment, effectively enhance cannabis drying efficiency, reduce environmental impact, and preserve product quality-particularly terpenes-making them promising alternatives to traditional methods for sustainable cannabis processing.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy (Ph.D.)
Level thesis:degree_level
Doctoral
Discipline thesis:degree_discipline
Biological Engineering
Department thesis:degree_department
Chemical and Biological Engineering
Grantor
University of Saskatchewan
Year dc:date.issued
2025

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Das, Pabitra Chandra
Advisors dc:contributor.advisor
  • Tabil, Lope G.
  • Baik, Oon-Doo
Committee members dc:contributor.committeemember
  • Niu, Catherine H.
  • Vujanovic, Vladimir
  • Acharya, Bishnu
  • Lefsrud, Mark
  • Rajagopalan, Nandakishore
ORCID person:identifier.orcid

Subjects

dc:subject × 1

Rights

Language dc:language.iso
en

Identifiers

dc:identifier.*
Handle dc:identifier.uri
https://hdl.handle.net/10388/17528

Chain of custody

source
Harvested from
University of Saskatchewan
Base URL
harvest.usask.ca/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Das, Pabitra Chandra. Postharvest processing of cannabis (Cannabis sativa) and valorization of its stalks. Doctoral thesis, University of Saskatchewan, 2025. https://hdl.handle.net/10388/17528