Back to search

University of Saskatchewan

Synthesis and Characterization of Iron Oxides onto Cellulose Supports for Adsorption of Roxarsone

Abstract

dc:description.abstract

This thesis reports on a systematic experimental study for the preparation of cellulose supported iron oxide (goethite and hematite) composite adsorbent materials, and the use of such materials for the adsorption of arsenic species from arsenic containing water. The research is divided into two sections: 1) Synthesis and characterization of the goethite and goethite-cellulose composites for the sorption of roxarsone (4-hydroxy-3-nitrobenzenearsonic acid) and 2) Synthesis and characterization of the hematite and hematite-cellulose composites for the sorption of roxarsone. Adsorption properties of the cellulose, goethite, hematite, goethite-cellulose, and hematite-cellulose adsorbents were studied with roxarsone as a model organoarsenical adsorbate. Iron nanoparticles (NPs) and their cellulose composites were prepared with good yield, goethite and hematite were 98% and 97%, respectively. The characterization of various adsorbent materials used several techniques: Thermal gravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, nitrogen gas adsorption/desorption (BET), 13C solid state NMR (ssNMR) spectroscopy, Transmission electron microscopy (TEM) and powder X-ray diffraction (pXRD). To understand the mode of interaction between the adsorbent and the adsorbate, Roxarsone (ROX) was used to study the molecular aspects of the adsorption process. The comparison between goethite-cellulose composites and hematite-cellulose composites was made by examining the surface area and available active adsorption sites on the iron oxide and cellulose materials surfaces. The nitrogen adsorption/desorption experiments showed hematite NPs have a relatively high surface area while TEM showed better dispersion of 10 nm hematite NPs onto the surface of cellulose at low iron coating. The maximum monolayer uptake (Qm) of the hematite was 0.155 mmol/g which was two-fold greater than goethite. The Qm value for the 25% Fe coated hematite-cellulose was 0.10 mmol/g and was 1.5-fold greater than the Qm value for the 30% Fe coated goethite-cellulose composite. The kinetic uptake results for the 25% Fe coated hematite-cellulose was 0.186 min-1, and exceeded the uptake rate for the 35% Fe coated goethite-cellulose. The better dispersion of hematite NPs resulted in more available active sites on the cellulose surface which increased the overall uptake of the roxarsone. Both goethite and hematite NPs provide adsorption sites that can bind with arsenic containing species. It is a cost effective and efficient way to disperse iron NPs onto a cellulose surface because such supported NPs are involved in the adsorption of arsenic species. On the other hand, the composite materials have an advantage over the pure mineral phase since composites can reduce NP leaching whilst enhancing the uptake of arsenic species at a lower levels of iron oxide doping.

Degree

thesis:*
Name thesis:degree_name
Master of Science (M.Sc.)
Level thesis:degree_level
Masters
Discipline thesis:degree_discipline
Chemistry
Department thesis:degree_department
Chemistry
Grantor
University of Saskatchewan
Year dc:date.issued
2017

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Kong, Dexu 1983-
Committee members dc:contributor.committeemember
  • Wilson, Lee D.
  • Majewski, Marek

Subjects

dc:subject × 1

Identifiers

dc:identifier.*
Handle dc:identifier.uri
https://hdl.handle.net/10388/8043

Chain of custody

source
Harvested from
University of Saskatchewan
Base URL
harvest.usask.ca/server/oai/request
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Kong, Dexu 1983-. Synthesis and Characterization of Iron Oxides onto Cellulose Supports for Adsorption of Roxarsone. Masters thesis, University of Saskatchewan, 2017. https://hdl.handle.net/10388/8043